Specification Sheets

Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2012 Elkay
(Rev. 8/12) 14-17J
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current spec sheet.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certai
n these features are not
overlooked.
Fountain/ Cuspidor Combination
Fully Recessed Wall Mount
Model EDFBC212C
S P E C I F I C AT I O N S
GENERAL
18 gauge (1.2mm), type 304, nickel bearing stainless steel wall
drinking fountain and cuspidor, designed to meet all sanitary
codes. Unit has embossed bubbler pad and built-in stream
splitter on drinking fountain side. Finish is hand blended to a
lustrous satin finish.
EDFBC212C: Fountain/cuspidor combination furnished
complete with Flexi-Guard
®
safety bubbler, fully assembled
front push bar, flow regulator provides constant stream from
20 to 105 psi water pressure and domed strainer. No traps
furnished.
NO LEAD DESIGN
THIS DRINKING FOUNTAIN COMPLIES WITH THE LEAD-
FREE DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988.
CONSTRUCTION
Exclusive Flexi-Guard
®
Safety Bubbler: Innovative design
utilizes a pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact, then returns to original posi-
tion. Strong. Abrasion-resistant. Anti-sweat. Keyed in location
to prevent rotation.
ALSO AVAILABLE
Model EDFBC12PBC: Cuspidor only with pushbar control.
Does not include fountain.
ACCESSORIES
MB24 Mounting Box is available as an optional accessory. For
the fountain/cuspidor combination model EDFBC212C, two
mounting boxes are required.
STANDARDS
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61 and 372.
Model EDFBC212C