Installation Sheet

8880*C_FTN 8880*C_W_CUSP 10245_CUSP

PAGE 1 98152C (Rev. A - 06/16)

Halsey Taylor Fountains are among the easiest to install Fountains on

the market today. To assure you install these models easily and correctly,

PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE

INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH

PLUMBING, ELECTRICAL, AND OTHER APPLICABLE CODES. After installation,

leave these instructions with the Fountain for future reference.

Halsey Taylor Owners Manual

INSTALLER

IMPORTANT

ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON

8880 FOUNTAIN

W/CUSPIDOR

10245 CUSPIDOR

See Fig. 7

9, 16, 20

4, 7, 21

3/8 Unplated

Copper Tube

See Fig. 10

Tube In

Packed Position

9, 16, 20

4, 23

1, 19

PAGE 1
8880*C_FTN 8880*C_W_CUSP 10245_CUSP Halsey Taylor Owners Manual 13 4, 7, 21 8880 FOUNTAIN 24 17 18 9, 16, 20 14 3/8 Unplated Copper Tube See Fig. 10 25 11 See Fig. 7 24 8880 FOUNTAIN W/CUSPIDOR 15 4, 23 13 1, 19 22 10245 CUSPIDOR 9, 16, 20 14 Tube In Packed Position 11 IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON INSTALLER Halsey Taylor Fountains are among the easiest to install Fountains on the market today.
PAGE 2
98152C (Rev. A - 06/16) 8880*C_W_CUSP PAGE 2 LEGEND A = RECOMMENDED WATER SUPPLY LOCATION 3/8 O.D. UNPLATED COPPER TUBE CONNECT STUB 1-1/2 IN. (38 mm) OUT FROM WALL SHUT OFF BY OTHERS B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/2” O.D. DRAIN FIG.
PAGE 3
8880*C_FTN 8880*C_W_CUSP 10245_CUSP INSTALLATION INSTRUCTIONS 1. Prepare the wall cutout opening(s). Refer to rough-In drawing on page 2. 2. Remove noise pad from paper and locate on bottom back of the basin between the drain and the bubbler holes (See Fig. 3). CAUTION: TO INSURE PAD DOES NOT INTERFERE WITH THE HOLE AREAS, TRIM THE PAD SO THERE IS APPROXIMATELY 1/2" (13mm) CLEARANCE AROUND THE HOLES. 3. Prepare waste connection(s) and water supply hookup connection.
PAGE 4
8880*C_FTN 8880*C_W_CUSP 10245_CUSP ITEMIZED PARTS LIST ITEM NO. PART NO. 8880 FTN PART NO. 8880 W/CUSP PART NO.