Spec Sheet

GENERAL
DESIGN FEATURES
Bowl Depth: 8" (203mm)
Coved
horizontal radius.
Corners: 2-1/2” (64mm) vertical radius and 2-3/4” (70 mm)
OTHER
OPTIONAL ACCESSORIES
Drain
Bottom Grid: GBG1414SS
Drain: LK35, D1125
Opening: 3-1/2" (89mm)
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 6/11) 2-79A
www.elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
SINK DIMENSIONS (INCHES)*
1, 2, MR2, 3, 4 or 5
Inside
Overall
Each Bowl
Minimum
L W L W D
Cabinet
Model
Number
L W Size
32-3/8
(822mm)
18-3/8
(543mm)
14
(356mm)
14
(356mm)
19
(483mm)
33
(838mm)
8
(203mm)
36DSE23319
*Length is left to right. Width is front to back.
No. of 1-1/2”(38mm)
Dia. Faucet Holes
4"(102mm) Center
Cutout in
Countertop
(1-1/2"(38mm)
Radius Corners)
SINKS ARE
MADE IN THE USA
Dayton Elite
®
Double Bowl Sink
Model DSE23319 Series
SPECIFICATIONS
Model DSE233194
Sink is formed of #20 gauge, type 301 series, nickel-bearing stain-
less steel. Top mount.
Bowl Depth is 6"
Model Illustrated
Bowl Depth is 8"
Model DSE233194 Illustrated
Finish: Exposed surfaces are polished to an Elite Satin finish.
Underside: Fully undercoated on bottom of bowl.
14”
14” 14”
19”
(356mm)
(356mm) (356mm)
(483mm)
(33")
(102mm)
4”
U-Channel Type Mounting System
Installation Hardware: Included for 3/4” (19mm) countertop.
3MR2
1
4
5
2
Hole Drilling Configurations
1-1/2
" (38mm) Diameter Faucet Holes on 4 " (102mm) Centers
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.