Spec Sheet

ManualsBrandsElkay ManualsSink & Faucet CombinationElkay Dayton Elite Collection DSE233223DFBG

GENERAL

Sink is formed of #20 gauge, 300 series, nickel-bearing stainless

steel. Top mount.

DESIGN FEATURES

Bowl Depth: 8-1/16" (206mm)

Faucet Deck: Raised

Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius.

Finish: Exposed surfaces are polished to an elite satin finish.

Underside: Fully undercoated.

OTHER

Drain Opening: 3-1/2" (89mm)

Note: Unless otherwise specified, sink is furnished with 4 faucet

holes as shown.

Model DSE233224

Elkay

2222 Camden Court

Oak Brook, IL 60523

(Rev.3/13) 2-11J

elkayusa.com

In keeping with our policy of c ontinuing product improvement, Elkay reserves the right to change

product specifications wit hout notice.

This specification describes an Elkay product with design, quality and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are not

overlooked.

Dayton

Elite Double Bowl Sink

Models DSE23321, DSE23322 and

DSEJ23322 Series

S P E C I F I C AT I O N S

Installation Hardware: Included for 3/4” (19mm) countertop.

Rim Height: 5/32” (4mm)

OPTIONAL ACCESSORIES

Bottom Grid: GBG1415SS

Drain: LK35, D1125

GBG1415SS

SINK PACKAGE

FAUCET FEATURES

LK1001CR

- Chrome finished, single-lever kitchen faucet with side spray.

- Flexible supply tubes with 1/2" (13mm) male IPS adapters.

LK5000CR

- Chrome finished, single-lever kitchen faucet with pull-down spray.

- Braided stainless steel supply lines.

Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,

cUPC, CA AB1953

Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.

DSE233224DF includes: (1) Sink - DSE233224, (1) Faucet - LK1001CR,

and (2) Drains.

DSE233223DFBG includes: (1) Sink - DSE233223, (1) Faucet - LK5000CR,

(1) Bottom Grid - GBG1415SS, and (2) Drains.

DRAIN FEATURES

Stainless steel body and strainer.

Fits 3-1/2” (89mm) opening.

BOTTOM GRID FEATURES

Nickel-bearing stainless steel

Bright finish

Dishwasher safe

LK1001CR

LK5000CR

Sinks are listed by IAPMO as meeting the applicable

requirements of the Uniform Plumbing Code , International

Plumbing Code , and National Plumbing Code of Canada.

Sink complies with ASME A112.19.3/ CSA B45.4

Summary of content (2 pages)

PAGE 1
Dayton® Elite Double Bowl Sink Models DSE23321, DSE23322 and DSEJ23322 Series SP E C I F I C AT I O N S GENERAL Sink is formed of #20 gauge, 300 series, nickel-bearing stainless steel. Top mount. DESIGN FEATURES Bowl Depth: 8-1/16" (206mm) Rim Height: 5/32” (4mm) Faucet Deck: Raised Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius. Finish: Exposed surfaces are polished to an elite satin finish. Underside: Fully undercoated.
PAGE 2
Dayton® Elite Double Bowl Sink Models DSE23321, DSE23322 and DSEJ23322 Series SP E C I F I C AT I O N S SINK DIMENSIONS (INCHES)* U-Channel Model Number J-Channel Model Number DSE23321 — DSE23322 DSEJ23322 Inside Each Bowl Overall L W A B L C W D D E 21-1/4 33 14 15-3/4 8-1/16 (838mm) (540mm) (356mm)(400mm) (206mm) 33 22 14 15-3/4 8-1/16 (838mm) (559mm) (356mm)(400mm) (206mm) Cutout in Countertop (1-1/2"(38mm) Radius Corners) L W No. of 1-1/2”(38mm) Dia.