Spec Sheet

GENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stainless steel.
Top mount.
DESIGN FEATURES
Bowl Depth: 7-1/16" (179mm)
Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius.
Rim Height: 5/32” (4mm)
Faucet Deck: Raised
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls.
OTHER
Drain Opening: 3-1/2" (89mm)
Installation Hardware: Included for 3/4” (19mm) countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG2115SS
Drain: LK35, D1125
Model DD125224DF
Elkay
2222 Camden Court
Oak Brook, IL 60523
©2014 Elkay
(3/14) SPEC00165
elkay.com
Dayton
®
Double Bowl Sink
Model DD125224DF
S P E C I F I C AT I O N S
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
U-Channel Type Mounting System
SINK PACKAGE
DD125224DF includes: (1) Sink - DD125224, (1) Faucet - LK2478CR
and (1) Drain.
FAUCET FEATURES
Chrome finished, single-lever kitchen faucet with side spray.
Flexible supply tubes with 1/2" (13mm) male IPS adapters.
Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,
cUPC, CA AB1953
Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.
LK2478CR
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
p roduct specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
21"
(533mm)
22"
(559mm)
15-3/4"
(400mm)
25"
(635mm)
Bowl Depth is 7-1/16” (179mm)
4"
(102mm)
Overall
Inside Each Bowl
Minimum
Model
Cabinet
Number
L W
Size
DD125224DF 4 3
(762mm)
0
25
(635mm)
L W L W D
22
(559mm)
21
(533mm)
15-3/4
(400mm)
7-1/16
(179mm)
24-3/8
(619mm)
21-3/8
(543mm)
No. of 1-1/2”
(38mm)Dia. Faucet
Holes 4"(102mm)
Center
Cutout in
Countertop
(1-1/2"(38mm)
Radius Corners)