Specification Sheet

Hand Wash-Up Sink With Sensor Faucet
AC/Battery Powered, Models CHS1716SACC,
CHS1716SACMC and CHS1716SACTMC ®
SPECIFICATIONS
GENERAL
CHS1716 Type 304 (18-8) stainless steel hand sink. Basin has
1-3/4" (45mm) radius coved corners. Full length 7" (178mm)
high backsplash. Exposed surfaces have a brushed finish.
Furnished with a wall hanger and integral stainless steel sup-
port brackets. Carries NSF International Certification.
(CHECK MODEL SPECIFIED)
MIXING
MODEL FAUCET DRAIN TRAP VALVE
CHS1716SACC LKB722C LK8 LK500 NONE
CHS1716SACMC LKB722C LK8 LK500 LK724
CHS1716SACTMC LKB722C LK8 LK500 LK723
LK8 Chrome plated grid strainer with 1-1/2" (38mm) O.D.
tailpiece.
LK500 Satin chrome cast brass "P" trap with cleanout, chrome
plated 1-1/2" (38mm) O.D. tubing waste arm to wall, and wall
flange.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.
Elka y Manufacturing Company
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay Mfg. Co.
(Rev. 4/10) 4-11A
www.elkay.com
Model CHS1716SACC
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
45
1/8" R
(3mm)
1-1/2"
(38mm)
8-5/8"
(219mm)
2-3/4"
(70mm)
2-1/4" (57mm)
15-1/2"
(394mm)
9-1/4"
(235mm)
1-3/4" R
(45mm)
1-3/4" R
(45mm)
15"
(381mm)
6"
(152mm)
1-1/2"
(38mm)
4"
(102mm)
16-3/4"
(425mm)
12"
(305mm)
2-3/8"
(60mm)
2-3/8"
(60mm)
2"
(51mm)
4"
(102mm)
7"
(178mm)
8-1/2"
(216mm)
ELKAY NAMEPLATE
3/8" (10mm) DIA. HOLE
3-1/4"
(83mm)
WALL HANGER 12" (305mm) LONG
1-1/4" (32mm) DIA. 1 HOLE
AT 45 ANGLE
2-3/16" DIA. HOLE
(56mm)
RAISED RIM AT
FRONT & SIDES
NSF SEAL
C
L OF FAUCET DRILLING
STAINLESS STEEL
BRACKETS WITH
HEMMED EDGE
3/8"
(10mm)
SECTION THROUGH RIM
LKB722C Sensor-operated, backsplash-mounted, non-mixing goose-
neck faucet with adjustable sensor eyes. A continuous beam is
emitted from sensor and faucet is activated when hands are
placed under the spout. Water will flow as long as hands
remain within sensor range. When hands are removed,
the water stops automatically based on shut-off delay setting.
The sensor then resets for the next user.
Chrome-plated solid brass construction with 2.0gpm laminar
flow control on spout end. Includes water-resistant sensor control
module and power cables. Features dual power options: AC
plug-in and battery holder with four AA batteries.
Slow-closing piston operated solenoid valve, in-line filter with clean-
out trap and flexible supply hose.
Control circuit is solid state, has adjustable sensor range
of 7/8" (22mm) to 6-3/4" (171mm), shut-off delay preset to 1
second and field adjustable to 2 seconds (to prevent sink
overflow).