Specification Sheet

ManualsBrandsElkay ManualsKitchen AccessoriesElkay Direct Bury Fountain Adapter Kit

ENERAL

Makes rough-in and installation easier for all models of non-

freeze resistant tubular fountains. Opening in adapter allows

for simplified routing of water supply and drain into the foun-

tain body. 3/4" rods provide added stability. Steel and E-coat

immersion which coats the outside and inside of the adapter

for the ultimate in corrosion protection.

its consists of:

• Adapter Panel

• (3) 3/4" Rods

• Assorted hardware (nuts, bolts and washers)

• needed for installation

• Installation instructions

When ordering use part #97890C

Shipping Weight: 40 lbs.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice.

This specification describes an Elkay product with design, quality and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are not

overlooked.

Direct Bury

Fountain Adapter Kit

Model No. 97890C



SPECIFICATIONS

Elkay

2222 Camden Court

Oak Brook, IL 60523

Printed in U.S.A.

(6/06) 19-24

elkayusa.com

ountain Adapter Kit

PARTS LIST

Item No. Part No. Description

1 45835C Adapter – Direct Bury Fountain

2 75618C Rod – 3/4" Diameter

3 75616C Nut – 3/4" 10UNC-2B Hex.

4 70204C Bolt – 3/8" 16UNC-2A Hex. Head

5 75611C Washer – 3/8" Lock

6 70421C Washer – 3/8" Plain

INSTALLATION INSTRUCTIONS

1. Thread nuts (Item 3) onto rods (Item 2) (one nut per rod).

2. Thread rods into adapter cylinder (Item 1) and tighten nuts

against cylinder securely.

3. Place washers (Item 6) on bolts (Item 4) (one washer per

bolt). Assemble bolts into adapter flange. Thread bolts all

the way in.

4. Secure adapter into concrete forms as per standard

practice and as shown below. Be sure to align adapter for

proper location of water inlet line, drain line, and required

fountain alignment.

5. After sufficient cure of concrete, remove flange bolts and

washers.

6. Mount fountain assembly per instructions supplied with

fountain and Items 4, 5 and 6.

6-1/4"

7-1/2"

10-1/4"

10" Ø

5-1/4"

FOUNTAIN BODY

4, 5, 6

2, 3 CONCRETE

FINISHED

GRADE