Installation Sheet

Installation Sheet
DIRECT BURY FOUNTAIN ADAPTER
For Use On 4400, 4410, 4420, & 4430 Model Fountains
Installer
To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUC-
TIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLI-
ANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES.
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS
A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE
BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELEC-
TROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS
CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED
BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE
BUILDING PLUMBING SYSTEM.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON
PAGE 1 97864C (Rev. C - 05/11)