User's Manual

ManualsBrandsELK Products ManualsElectronicsTransceiver Module

ELK-6032 OUTDOOR PIR Manual Page 1

ELK-6032

Wireless Outdoor PIR Sensor

For the latest downloadable version of this manual visit our website: http://www.elkproducts.com

Installation and Setup Guide

APPLICATION & OVERVIEW

The ELK-6032 is designed for use with control/transceivers that accept

Elk's two-way technology; such as the ELK-M1XRFTW. It is intended

for use in residential and light commercial installations and incorporates

many features designed to ensure its reliable performance.

The 6032's dual element pyroelectric sensor detects movement within

a specic coverage area, by sensing the infrared energy that is emitted

from an intruder moving across the sensor's eld of view. A change in

the infrared energy creates a temperature change in the sensor's zones,

which is then processed to determine if the occurrence qualies as a

legitimate motion detect alarm event.

Whenever a violation or alarm event is conrmed the two-way radio

transmitter will transmit that to the control/receiver. In addition to alarms

the transmitter also sends tamper detect, supervisory, and low battery

messages to the control/receiver. Each sensor has a unique TXID

identication number which must be enrolled into the control during

installation.

With its two-way capability, the 6032 radio expects a positive

acknowledgment from the control/receiver after every transmission. This

helps ensure that all messages are delivered and also makes the sensor

very energy efcient since it does not waste time or energy repeating any

transmissions unless they have not been acknowledged.

Like all battery powered motion detectors, there is a battery saving sleep

timer designed to help extend the battery life. When the sensor rst detects

motion it will inform the radio transmitter to notify the control and expect

an acknowledgment. The sensor will then enter the battery saver sleep

mode and will require either 5 secs. or 120 secs. of inactivity before it

will be able to activate again. There are two (2) time choices, 5 secs. or

120 secs. which is selectable via DIP Switch #2.

FEATURES

• Wireless two-way communication

• Dual element pyroelectric sensor

• Selectable pulse count

• Selectable Sensitivity

• Excellent immunity from white light, RF, and ESD interference

• Transmitter board has Bi-Color RF Acknowledge LED

• Long life Lithium batteries {supplied}

• Low battery trouble signal

• Sleep Cycle "Battery Saver" (2 time settings)

• Periodic (64 min.) Supervisory check-in

• Cover tamper protection

The ELK-6032 is a cooperative effort with Optex Corporation combining

their VX-402R with Elk's Two-Way Wireless Radio Transmitter.

SPECIFICATIONS

• Detection Method: Dual Element Pyroelectric

• Coverage: 12m (40 ft.) x 90° wide

• Detection Zone: 14 Zones

• Mounting: Wall or Pole

• Mounting Height: 0.8 to 1.2m (2.7 to 4 ft)

• Sensitivity: 2.0°C at 0.6m/s (3.6°F at 2.0ft/s)

• Detectable Speed: 0.3 to 1.5m/s (1 to 5ft/s)

• Pulse Count: 2 or 4, selectable

• Sensitivity Selection: Low, Med, High

• External LED Indicator: Off for normal operation, On for Walk Test

• Power Input: 3.0 VDC

• Operating Voltage: 2.5 to 10 VDC

• Battery Type & Size: 2 x Lithium CR123A

• Current Draw: Max. 6mA (Walktest, LED on, Transmitting)

• Standby (Quiescent) Current Draw: 14µA

• Battery Saver Sleep Time: Selectable 5 sec. or 120 sec.

• Operating Temp: -17°C to +49°C (0°F to 122° F)

• Humidity: 95% RH Max. non-condensing

• Warm Up Period: Approx. 2 minutes

• Weather Resistancy: IP54

• Dimensions: 80mm(3.154")W x 198mm(7.8")H x 108mm(4.25")D

• Weight: 480g (16.9oz)

• Accessories: Pole mount kit, Screw kit, Area Masking Plate

• Frequency: 902 - 928 Mhz channel hopping Sensitivity

• RF Transmitter board Acknowledge Indication: Bi-Color LED

Summary of content (7 pages)

PAGE 1
ELK-6032 Wireless Outdoor PIR Sensor Installation and Setup Guide APPLICATION & OVERVIEW The ELK-6032 is designed for use with control/transceivers that accept Elk's two-way technology; such as the ELK-M1XRFTW. It is intended for use in residential and light commercial installations and incorporates many features designed to ensure its reliable performance.
PAGE 2
GUIDELINES FOR SETUP AND USE The 6032 Sensor is for Outdoor or Indoor use. It may be mounted directly on a wall or on a solid and stationary pole. We recommended that it be mounted within 200 to 300 feet of the control/transceiver. While an open-air range of 400 feet or more is possible, adverse indoor and environmental conditions can significantly reduce the actual transmission range. Small changes to the sensor's mounting can often make a big difference in transmission range.
PAGE 3
The 6032 Sensor must be enrolled into the Control using one of the following methods. 3. SENSOR ENROLLMENT FROM KEYPAD 3.1 Make sure the M1XRFTW Transceiver is powered up and enrolled with the M1 Control. 3.2 Enter M1 Keypad Installer Programming and navigate to Menu: 14-Wireless Setup 3.3 Scroll up to sub-menu:3:Learn Sel Wireless Transmtr and press Select (right arrow). 3.4 Scroll to and select an unassigned WZone (wireless zone) and press Learn (right arrow) to enroll. 3.
PAGE 4
3. Install the back box on the wall with two screws. 4. Install two (2) CR123A Batteries in radio transmitter board located in the back of the electronics unit. 5. Position the electronics unit onto the backbox and secure with two (2) screws. Wire Connections Should it ever be necessary to disconnect the Radio Transmitter from the Sensor the following color code should be used when re-connecting: Red = +3V, Blk = (-) Neg, Grn = ALM, Wht = Neg, Blu = TMP 6.
PAGE 5
ELK-6032 OUTDOOR PIR Manual Page 5
PAGE 6
The 6032 Page 6 ELK-6032 OUTDOOR PIR Manual
PAGE 7
ANTI-TAMPER SWITCH This switch detects the separation of the front housing from the backplate, resulting in a signal being transmitted to the control/transceiver that will cause the associated zone to become violated. Snapping the front housing back onto the backplate will transmit a restoral. FUNCTIONAL 'SYSTEM' TESTING LIMITATIONS While the 6032 Passive Infrared (PIR) Motion Detector is a highly reliable intrusion detection device, it does not offer guaranteed protection against burglary.