Manualshelf

User Manual

ManualsBrandsELIVED ManualsElectronicsFull Motion TV Wall Mount Bracket Articulating 6-Arm for 42-70 Inch LED, LCD, OLED Flat Screen TVs, TV Wall Mount with Swivel and Tilt, Fits Max VESA 600x400mm, 100 lbs. Loading, 12”/16” Studs, ELIVED
12
How to install your TV with an optimal viewing height?
Experts agree that 42 inches from the center of the TV to
the floor is ideal.
3-Step installation ( DO NOT MOUNT ON DRYWALL ALONE!)
1 Install wall plate. 2 Attach bracket to TV back.
3 Hang TV onto wall plate.
Attention on the VESA (TV Mounting Holes) location.
2
Step 1-1
Select TV screw diameter
Step 2A Wall plate installation (wood stud)
2A-1
2A-2
Locate your studs. Verify and
mark the center of the studs by
finding the stud edges using an
awl, a thin nail, and an
edge-to-edge stud finder.
Thread screws by hand into the threaded holes on the back of your TV to select which screw
diameter fits your TV.
Hardware Included
M6M4
M8
Step 1-2 Select TV screw length
Correct
Correct
Too Long
Too Short
Step 1-3
Attach the bracket
CAUTION:
Ensure bracket is securely fastened before moving on to the next step.
Hardware （Wall /Product)
Lag Bolts 5/16 x 2½ in
x4
x1
CA
Washers Ø8mm
x4
B
Open-end wrench
Max:600x400mm /24x16"
Min:200x100mm/8x4"
42"~70"
YD1005-A
INSTALLATION INSTRUCTION
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M4 x 12mm
M4 x 30mm
Washers
Ø6mm
M4-5-6
Spacers
L10mm
x4
x4
x4x4
Philips Screws
M8 x 25mm
M8 x 45mm
x4
x4 x8 x4
Spacers
L5mm
x8
TV Screws / Washers
M-A M-B M-C M-D M-E M-F
Top of TV
Position the mounting template
at your desired height and line up
the holes with your stud center
line. Level the mounting template
and mark the pilot hole locations.
Bubble level X1
Mounting template X1
Safety Caution
Must Check Before Getting Started
Installation Tools (Not Included)
Band
Tape
2M
Socket
Wrench
ScrewdriverPencil Electrodrill
Stud
Finder
HammerAwl
Wood
Drill Bit
Masonry
Drill Bit
Wood Stud Installation Concrete Installation
1/2"
(13mm)
3/8"
(10mm)
7/32"
(5.5mm)
MAX:400mm/16"
MAX:
400mm/16"
Min. 8"
(203mm)
Solid concrete wall
CAUTION: DO NOT install into drywall alone.
<16mm(5/8")
Max.
16"(406mm)
Drywall with wood studs
Max:
(45.5KG)
100LBS
Max:
(45.5KG)
100LBS
(a) For Flat Back
(b) For Round Back / Extra Space
Max 406mm (16”)
Mounting template
Bubble Level
No!
No!
When attaching brackets to the flat screen, be careful not to over tighten screws and
be sure that screws do not bottom out in the mounting holes.
How to install your TV with an optimal viewing height?
Experts agree that 42 inches from the center of the TV to
the floor is ideal.
3-Step installation ( DO NOT MOUNT ON DRYWALL ALONE!)
1 Install wall plate. 2 Attach bracket to TV back.
3 Hang TV onto wall plate.
Attention on the VESA (TV Mounting Holes) location.
2
Arm and Wall Plate
Brackets
Arm Extensions
01
x1
03
x2
Front Support
02
x1
04
x2
04
M-E
Not for M8 screws
M-A
Use the shorter screws
M-B
M-C
04
M-E
M-D
M-F
Not for M8 screws
M-A
Use the longer screws
M-B
M-C
(V3.1)
If you have any questions, please contact us.
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly
or use of this product, please contact us.
● This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
● The wall must be capable of supporting five times the weight of the TV and mount combined.
● Do not apply this product to any purpose not indicated by ELIVED.
●
Incorrect installation may result in product damage or body injury. ELIVED shall bear no responsibility
for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage,
please contact us.
2
1
5
4
3

Summary of content (2 pages)