User Manual

Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly
or use of this product, contact Customer Service.
● This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
● The wall must be capable of supporting five times the weight of the TV and mount combined.
● Do not apply this product to any purpose not indicated by ELIVED.
● Incorrect installation may result in product damage or body injury. ELIVED shall bear no responsibility
for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage,
please contact us.
Must Check Before Getting Started
Installation Tools (Not Included)
Band
Tape
2M
Socket
Wrench
ScrewdriverPencil Electrodrill
Stud
Finder
HammerAwl
Wood
Drill Bit
Masonry
Drill Bit
Wood Stud Installation Concrete Installation
1/2"
(13mm)
3/8"
(10mm)
7/32"
(5.5mm)
MAX:600mm/24"
MAX:
400mm/16"
Max:
110LBS
(50KG)
Min. 8"
(203mm)
Solid concrete wall
CAUTION: DO NOT install into drywall alone.
<16mm(5/8")
Max.
16"(406mm)
Drywall with wood studs
STEP 2 Attach Wall Plate to Wall
OPTION A: Wood Stud Installation
Supplied Parts and Hardware
1-3 Attach the TV Brackets
No!
2A-1
1 2
3
4
Phillips
Screwdriver
TV Brackets
x1
J
x1
I
Not for M8 Screws
May be needed
TOP OF TV
YD1002-A INSTALLATION INSTRUCTION
If you have any questions, please contact us.
(V5)
37"~70"
Max:
110LBS
(50KG)
Max: 600x400mm/24x16"
Min: 150x100mm/6x4"
Velcro Cable Ties ×3
Bubble Level ×1
Wall Plate Cover
x1
Wall Plate
x2
H
Use Wrench (C) fasten the Nut (F) tightly.
7/32"
(5.5mm)
2A-3
Wall plate
unit
2A-2
24”
16”
18”
STEP 1 (Continued) STEP 2 (Continued)
Lag Bolt
M8x65mm
x4
A
M8 Washer
x4
B
wrench
x1
C
Washer
M6
x2
E
M6 Nut
x2
F
M4 Allen Key
x1
G
Bolt
M6x12mm
x2
D
Hardware (Wall / Product)
NOTE: Not all hardware included will be used.
x4x4 x4x4 x4x4
Philips Screws
M4 x 12mm
M4 x 30mm
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M8 x 25mm
M8 x 45mm
MA MB MC
x8
Spacers
M8 x 10mm
MD
x4
Washers
M6
ME
x8
Spacers
M8 x 5mm
MF
TV Screws / Spacers / Washers
Center line
Min. Wood Stud Size:
nominal 4"(102mm)
actual 3 1/2"(89mm)
Wall before Wood Stud
<16mm(5/8")
Min. Wood Stud Size:
nominal 2"(51mm)
actual 1 1/2"(38mm)
24"(610mm)
/16"(406mm)
STEP 1 Attach the TV Brackets
1-1 Select TV Screws
1-2 Need Spacer?
No, just choose the screws, washers.
Yes, choose the appropriate screws, washers,and spacers for your TV.
TV back
Bracket
Long Screw
Spacer
Washer
Bracket
Washer
TV back
Short Screw




Correct Diameter
Correct LengthToo LongToo Short

Too SmallToo Large
01 040302
For more spacing
between bracket and TV
For raised back TV For Counterbore of TV To avoid the
blocked input
M8
M6
M4
5
2.75"(70mm)
Be sure to drill into the center of the stud.
Bubble
Level