User Manual

1. Materials needed: 2 Lint-Free white cloths, Mild Soap (hand soap is suitable) and Water.

2. Take the Lint-Free cloth and submerge it in warm water for cleaning light dust and dirt. For stubborn stains or a sticky

surface, a solution of mild dishwashing liquid diluted with warm water should be used.

3. Completely ring out cloth so it is lightly dampened, not drenched.

4. Using the damp cloth, lightly wipe in an up and down motion starting at the left of the screen moving to the right of the

screen. DO NOT WIPE IN CIRCULAR MOTION.

5. Once you have completed wiping the entire screen with a dampened Lint-Free cloth, use the dry Lint-Free cloth to wipe

off any excess water from the screen.

1. Materials needed: 2 Microfiber cloths and water.

2. Gently blot the area using a lightly dampened lint-free microfiber cloth with clear warm water. DO NOT rub.

3. Using the damp cloth, lightly wipe in an up and down motion starting at the left of the screen moving to the right of the

screen. DO NOT WIPE IN CIRCULAR MOTION.

4. To clean a stubborn stain or a sticky surface, spray a solution of equal parts Formula 409 and warm water onto a

lint-free microfiber cloth. DO NOT SPRAY THE SCREEN MATERIAL DIRECTLY.

NEVER ALLOW ANY SOLVENTS TO DRY ON THE MATERIALS AS THEY WILL CREATE A STAIN THAT IS NON-

REMOVABLE.

**If Heavily soiled (marked permanently): Unfortunately you may NOT use any solution to clean the surface as it

will damage the screen. If there is a mark, it is permanent.

• You can NOT repair a screen if it is torn.

**If heavily soiled (marked permanently): You may use alcohol with a Q-Tip to clean.

1. Dip one side of the Q-Tip in Alcohol 3. Use dry side of Q-Tip to go over mark to dry it.

2. Gently wipe marked spot ONLY. 4. You may wipe over with dry Lint-Free Cloth to finish.

Care & Use

Care for the following materials:

CineWhite

, CineGrey, MaxWhite

, MaxWhite

2, MaxWhite

FG, Spectra White FG, AcousticPro UHD

Proper care and use will maximize the life of the material and bring you years of enjoyment.

Care for the following materials:

CineGrey 3D®, CineGrey 5D®, PowerGain and AirBright 3D2

Screen Material Maintenance Care

General Cleaning Instructions

PAGE 1
Screen Material Maintenance Care General Cleaning Instructions Care & Use Proper care and use will maximize the life of the material and bring you years of enjoyment. Care for the following materials: CineWhite®, CineGrey, MaxWhite®, MaxWhite® 2, MaxWhite® FG, Spectra White FG, AcousticPro UHD 1. Materials needed: 2 Lint-Free white cloths, Mild Soap (hand soap is suitable) and Water. 2. Take the Lint-Free cloth and submerge it in warm water for cleaning light dust and dirt.
PAGE 2
Ceiling Ambient Light Rejection Screen Fabric Maintenance: StarBright CLR® and CLR® 3 Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the projection image. Follow the instructions below to properly maintain the screen. 1. The screen surface has a horizontal linear structure. DO NOT wipe the screen up and down or in a circular motion. Wipe gently from left to right only. 2. Clean the dust on the screen surface with a soft brush or microfiber cloth.