Quick Start Guide For Tablet TG08RK
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Manufacturer's Name: Shenzhen NST Industry and Trade Co.,Ltd Tablet PC Model number: TG08RK Operating Temperature: ‐10° C to 40° C This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. 1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 2. The product shall only be connected to a USB interface of version USB 2.0 3.
Be sure to keep the power cord away from younger children Please ensure that students understand the following: As with all electrical products, precautions should be observed during handling and use to prevent electric shock. The power supply (adapter) should not be handled by the children.” Emphasize to students that this device is an educational tool and not a toy. The tablet, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused.
Safety Precautions The following are lists of precautionary measure the students must understand before using this tablet inside the classroom or home environment: 1. Do not place near the fire or other sources of heat. 2. Do not expose to magnetic fields. 3. Do not expose to direct sunlight. 4. Do not expose to rain or moisture. 5. Do not place heavy objects to add heavy pressure on the tablet. 6. Do not drop the tablet.
Package contents Carefully unpack your box and take out the items listed below. If any of the items are missing or damaged, please contact your dealer immediately: • One tablet • One stylus •One USB charger •One USB 2.
Tablet layout No. Name No. Name 1 Touchscreen 5 Audio Combo jack 2 Front facing camera 6 Micro HDMI 3 Stylus holder 7 Micro SD card slot 4 Microphone 8 Micro USB 2.
No. Name No.
Charging your tablet If your tablet is just being unpacked from the box, you need to charge the tablet first. It will take around 4 to 5 hours to be fully charged. 1. Take out the provided USB cable. Plug the USB head of the cable into the adapter. 2. Plug the micro USB head of the cable into the micro-USB port on your tablet. 3. Plug the adapter into a wall-socket.
Powering ON/OFF your tablet To power on your tablet Press and hold the power button down until the screen turn on. To power off your tablet To turn off your tablet, follow these steps: 1. Press and hold the Power Lock button. 2. Touch Power off from the menu. 3. Touch OK to power down your tablet.
Inserting a storage card Your tablet supports micro-SD cards with maximum storage space up to 32G. You can insert the micro SD card and pull it out without powering down the tablet. To do so, follow the steps below. Install your Micro SD Card 1. Hold your tablet with front side up. 2. Insert your micro SD card in the direction as shown. Remove your Micro SD Card 1. Push and release the micro SD card. This will unlock the card. 2. Pull out the micro SD card.
Flip-up holder The holder allows you to adjust the viewing angle. There are 2 angles to choose from. 1. Just flip the holder up as show below. 2. Slide the holder down to the angle you want, as shown below. 3. The holder shall click to the position and your tablet is ready now.
Specifications Processor Memory Storage RK3368, 8 cores 1.5 GHz: 64-bit LPDDR3 Default 2 GB eMMC Default 32 GB Wi-Fi 802.11 ac, 1*1, 2.4GHz/ 5.0GHz (Dual band) Bluetooth 4.0 8-inch IPS LCD Resolution: 800×1280 pixels Support 5-points multi-touch Capacitive multi-touch GLS1686 Passive Stylus(3mm thin-head /hard tip) Front: 2M Rear: 2M Li-polymer 6000mAh, 3.7V, 22.2W or 6000mAh 3.8V, 22.
Input/Output Speaker & Mic USB-Charger Dimension (WxHxD mm) Weight 1 x Micro USB 2.0,OTG port (Type B) 1 x Micro SD card slot 1 x Audio Combo jack 1 x Micro HDMI 2 x Build-in Stereo Speakers, 1W, 8 Ohm 1 x Internal digital MIC DC Output: 5V/2A/10 Watt (Micro USB) Input Voltage: 100 - 240VAC Body: 135.3 x 214 x 11.5 Silicon cover (max.
