Quick StartGuide For Android Tablet TC80RA1
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
※ Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel. To prevent possible hearing damage, do not listen at high volume levels for long periods. Package contents Carefully unpack your box and take out the items listed below.
Tablet layout No. 1 Name No.
No. Name No.
Charging your tablet If your tablet is just being unpacked from the box, you need to charge the tablet first. It will take around 4 to 5 hours to be fully charged. 1. Plug the USB head of the cable into the adapter. 2. Plug the micro-USB head of the cable- with the side marked with “B” or an icon facing down - into the micro-USB port on your tablet. 3. Plug the adapter into a wall-socket.
Powering ON/OFF your tablet To power on your tablet Press and hold the power button down until the screen turn on. To power off your tablet To turn off your tablet, follow these steps: 1. Press and hold the Power Lock button. 2. The Power-off menu appears as shown below. Touch Power off. 3. Touch OK to power down your tablet.
Inserting a storage card Your tablet supports micro-SD cards with maximum storage space up to 32G. You can insert the micro SD card and pull it out without powering down the tablet. To do so, follow the steps below. Install your Micro SD Card 1. Hold your tablet with front side up. You can find the micro SD card slot on the same side with the power button. (For detail, see page 4) 2. Insert your micro SD card in the direction as shown. Remove your Micro SD Card 1. Push and release the micro SD card.
Specifications Processor Memory Storage Wireless Touchscreen Cameras Battery Input/Output Intel® Bay Trail-T Z3735G Base 1.33 GHz, Burst to 1.83GHz 2MB L2 Cache DDR3L- 1333 Default1 GB eMMC v4.4.1 Default: 8GB (for KK 4.4), up to 16GB (for Win8.1) Wi-Fi 802.11 b/g/n Bluetooth 4.0 8-inch 1280 x 800IPS 5-point multi-touch Capacitive pen support Front: 0.3M Rear: 2.0M 1Cell , 1S1P Li-polymer 3900mAh 1 x micro-USB 2.
Speaker& Mic Build-in Speaker x 2 Analog MIC x 1 AC-Adapter DC Output: 5V/2A Input Voltage: 100 ~ 240VAC Input Frequency: 47 ~ 63Hz Dimension (mm) 213 (W) x 129 (H) x 10 (D) Weight 0.
