TA70CA1 Motherboard Guide
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmittermust be installed to provide a separationdistance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 JEM 13H130JV6070 PIFA Antenna 2.98 dBi for 2.4GHz 2. WGT 13H130JV6050 PIFA Antenna 2.48 dBi for 2.4GHz Note: The antenna connector is I-PEX type.
Motherboard layout Main components No. Name No.
System connectors No. Name No.
I/O Ports No. Name No.
Features Processor l l Intel Clovertrail+ Z2520 Up to 1.2GHz, Dual core Memory l l 8bit, LP DDR2 Mobile RAM PoP 1GB / 2GB (optional) Storage l l Single eMMCv4.4.1 Default 8GB Wireless l l l Wi-Fi 802.11 b/g/n Wi-Fi hotspot Bluetooth 2.1+EDR support l l LVDS interface Resolution: 1024(H) × 3 (RGB) × 600(V) pixels Support 5-points multi-touch Display l l Cameras l Front camera: 2.
l 1 x micro-USB 2.0, OTG port (Type A/B) 1 x Mic/head phone jack combo 1 x micro-HDMI 1.
