i
Preface Copyright 2005 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Notices Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Content Before you Start------------------------------------------------------------ 1 Conventions of This Manual ...................................................................... 1 Regulatory Statement Sample.................................................................... 1 Safety Precautions ....................................................................................... 3 Wichtige Sicherheitshinweise....................................................................
Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur du Canada. Personal Inventory This Notebook computer system is designed for years of productive and pleasurable computing. Use this section to keep notes about details of your purchase. Update this section when you add new options.
BEFORE YOU START Conventions of This Manual Use this manual will help you get the most from your notebook computer. • If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. • If you are a less experienced user, you should through the manual carefully before using your system.
• In France outdoor operation is only permitted using the 2.4 – 2.454 GHz band: Channels 1 – 7 EUROPE – RESTRICTIONS FOR USE OF 5GHZ FREQUENCIES IN EUROPEAN COMMUNITY COUNTRIES Allowed Frequency Bands • • • • • 2 Allowed Channel Numbers Countries 5.15-5.25GHz 36, 40, 44, 48 Austria 5.15-5.35GHz 36, 40, 44, 48, 52, 56, 60, 64 Cyprus, Czech Republic, France, Hungary, Slovakia 5.15-5.35 & 5.4705.
This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption in communications of this device.
Liquid has penetrated into the equipment. The equipment has been exposed to moisture. The equipment has not worked well or you cannot get it work according to the user's manual. e. The equipment has dropped and damaged. f. If the equipment has obvious sign of breakage. Do not leave this equipment in an environment unconditioned, storage temperature above 60°C (140°f), it may damage the equipment. The unit can be operated at an ambient temperature of max. 35°C.
19. 20. 21. 22. and injury to persons. These precautions includes the followi ng: Ø Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Ø Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Ø Do not use the telephone to report a gas leak in the vicinity of the leak. Ø Use only the power cord indicated in this manual.
. 13. 14. 15. 16. 17. 6 Flüssigkeien in das Gerät gelangen. Dies könne einen Brand bzw. Elektrischen Schlag auslösen. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur von authorisiertem Servicepersonal geöffnet werden. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu Überprüfung.: a. Netzlabel oder Netzstecker sind beschädigt. b. Flüssigkeit ist in das Gerät eingedrungen. c.
Die Minimalanforderungen für das Kabel sind .75m ㎡ Leiter. C. Für andere Länder: Ø Die Zubehörteile des Kabel-Sets müssen das Prüfsiegel derjenigen Stelle, die in dem jeweiligen Land für die Sicherheitsprüfung zuständig ist, tragen. Ø Das Kabel muss vom HAR (harmonisierten) Typ H03VV-F sein. Ø Das Kabel-Set muss eine Stromkapazität von mindestens 2,5 Ampere haben und Spannungen von 125 oder 250 V Wechselstrom gestatten.
Things you must remember before working on your computer Let your computer acclimate itself Your notebook can easily stand temperature extremes but it doesn’t like rapid changes in temperature, like going from the cold outdoors to a warm office. Rapid changes in temperature can cause water droplets to condense inside your case, threatening to damage the electronic parts inside.
INTRODUCTION Welcome to the Notebook PC Congratulations on your purchase of the Notebook PC. Your Notebook features the latest advances in portable computing technology. The Notebook’ s modular design provides maximum expandability without compromising portability. The high-performance CPU and enhanced IDE hard drive provides you with extra processing power for handling complex graphics and running large programs.
To avoid damage to the display panel: 1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel. With the LCD screen open, you will see several features important for operating your Notebook computer. Each of these features is briefly described below. 1. LCD Screen 2. Power/Resume Button 3. Wireless LAN Button 4. Internet Explorer Button 5.
Wireless Connection Indicates when the system LAN is functioning. HDD Indicates that the computer is accessing the hard disk drive. Numeric Lock Indicates that the keyboard is in Num Lock mode. Caps Lock Indicates when the keyboard is in Caps Lock mode. In this mode, the keyboard produces uppercase text when you press a key. When you press the Caps Lock key again, the indicator goes off and the keyboard produces lowercase text. Scroll Lock Indicates when the keyboard is in Scroll Lock mode.
The Left Side 1. Ventilation Opening 2. Speaker The Right Side 1. Speaker 2. CardReader 3. USB Ports LED Indicators These three LED indicators are separately program for the following functions: Power On, Suspend Mode and Battery Charge. 1. Battery Charge This indicator will lit green when the battery is in charging status. When the indicator light turns off, it indicates the system is in full charge. 2. Suspend Mode This indicator will lit when the notebook enter the suspend mode. 3.
The Rear 1. Cable TV Input Before connecting the cable into the connector, be sure to remove first the cover on the TV connector at the rear of the computer with the aid of a screw driver. 2. The LAN Port When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. In order to meet EMV requirements, kindly locate the Core (for LAN cable) that can be found in the accessory box. 1. 2. 3. Clamp the LAN cable around the core. Close it up as shown in the illustration.
3. The Modem Port Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord. 4. 5. 6. 7. 8. 9. 10.
The Bottom Panel 1. 2. 3. 4.
Page intentionally left blank 16
GETTING STARTED Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’ s battery pack. The adapter’ s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. The power cord for the AC adapter requires a three-hole grounded AC outlet. To connect the computer to an external power source: 1. 2.
Whenever possible, keep the AC adapter plugged into the Notebook and an electrical outlet to recharge the battery. Never turn off or reset your Notebook while the hard disk is in use and the CD-ROM status icon is lit; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Notebook before turning it back on; turning the power on and off in rapid succession can damage the Notebook’ s electrical circuitry.
Inserting and Removing the Battery Pack The battery pack should already be inserted in your Notebook computer when you unpack it. If not inserted, follow these directions: 1. Turn over the notebook with the front of the unit facing you and place it on a solid, flat surface. 2. Angle the battery into the bay. The front edge of the battery should slide into the grooves in the s ystem case. Gently lower the battery into the bay and push it until it clicks securely in the bay. To remove the battery pack: 1.
3. Hold the battery at the finger grip and lift it out of the compartment. Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. It is a good idea to occasionally discharge the battery pack fully to preserve its operating performance.
USING THE NOTEBOOK COMPUTER Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. KEYS FUNCTIONS [Fn] + [F7] Decreases the brightness level. [Fn] + [F8] Increases the brightness level. [Fn] + [F10] Use this key combination to expand your video screen or reset to its original size. [Fn] + [F12] This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT. LCD Care LCD screens are delicate devices that need careful handling.
A Tour of the Notebook’ s Keyboard The Notebook’ s keyboard uses a standard QWERTY layout with the addition of special function keys and an embedded numeric keypad for number intensive data entry. Your keyboard supports Windows by incorporating the two Windows specific keys. With the two Windows keys you will be able to access and take advantage of many of the timesaving features of Windows software.
[Fn] + [F2] beeping sound This key combination turns on/off the volume. [Fn] + [F3] Decreases the speaker volume. [Fn] + [F4] Increases the speaker volume. [Fn] + [F5] Enable/Disable the system Touchpad function [Fn] + [F7] Decreases the brightness level. [Fn] + [F8] Increases the brightness level. [Fn] + [F10] Use this key combination to expand your video screen or reset to its original size. [Fn] + [F12] This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT.
You can use the TouchPad with Microsoft Windows as well as nonWindows applications. The CD-ROM/DVD-ROM/Combo Features of the CD-ROM/DVD-ROM/Combo Module The features of the CD-ROM/DVD-ROM/Combo drive are listed below. • • • The Audio Play feature allows you to play music CDs Front panel load/unload button Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session Photo CD™, CD-I/Video CD (pcs.) • Low power consumption • 12.
Do not insert any foreign objects into the disc tray. If you experience difficulty when ejecting the CD disk tray, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject hole located on the right side of the front panel. The CD disk tray should eject immediately. This procedure can also be used to remove a CD from the drive when the Notebook is powered off.
Power Saving Modes This section contains information on the Notebook’ s power system, including the AC Adapter, the battery system, recharging the battery, and tips for conserving battery power. The power system is comprised of two parts, the AC Adapter and the battery system. The AC Adapter converts AC power from a wall outlet to the DC power required by the computer.
Turn the Notebook off. Connect the AC adapter and let the battery fully recharge. When the battery charge indicator turns off, the battery is fully charged. 3. Turn On the notebook, let the battery run down until the battery is in low-low state and you hear a warning beeps. The system will automatically enter the Suspend mode. You can now connect the AC adapter. 4. The battery pack is now calibrated properly.
Sound Meaning Continuous beeping every 5 seconds Battery Low: Indicates that there is 7 to 10 minutes charge remaining. Beeping accelerates Battery Low Low: Indicates that there is 1 to 2 minutes of battery charge remaining. Save your work and turn off the Notebook, or connect the AC adapter. When there is only one minute of battery charge remaining, the Notebook will suspend to the HDD and power off. You should connect AC power and resume to save your work.
When the battery charge LED turns off will indicate the system is fully charged. 5. Repeat step 1 to 4 once again. 6. The battery is now fully calibrated. Resetting the System After installing a software application package, you may be prompted to reset the system to load the changed operating environment. To reset the system, or “reboot,” press the [Ctrl]+[Alt]+[Delete] keys simultaneously. This is known as “warm boot.
Page intentionally left blank 30
DESKTOP OPERATION Your notebook is capable of providing you with efficient and productive mobile computing, it also has the speed and capacity to service as a desktop system. This chapter discusses those functions of your notebook that are typical of desktop systems. Audio The Multimedia Sound System The Notebook’ s built-in audio capabilities allow you to take advantage of a wide range of education and entertainment multimedia software.
Audio Software Your notebook comes equipped with an integrated sound system capable of providing you with quality audio sound through the built-in speakers or through external speakers connected via the system ports. Sound Recording Your system allows you to record sounds and store them as files using the microphone via the microphone jack on the rear of the notebook computer. Check the Windows Help and Support Center in Windows for information on using the various elements in sound recording.
Connecting Peripheral Devices To expand your computing capabilities, you can add a variety of external devices to your computer.
Page intentionally left blank 34
INTERNET CONNECTION (OPTIONAL) There are numerous ways to connect to the Internet. This may vary from the user’ s working environment as well as system specifications. • Using a modem and a telephone line • Using a wired LAN • Using a wireless LAN (Optional) Using a modem for Connection to Internet • Use a telephone line to connect to the modem port of your computer. Do not use a digital telephone line.
36 4. Select “Properties” from the popup menu that appears 5. In the “This connection uses the following items” field, select “Internet Protocol (TCP/IP), and click “Properties”.
6. Enter the system’ s IP and DNS server addresses on the General tab of the “Internet Protocol (TCP/IP) Properties” window. If DHCP is used, click “Obtain an IP address automatically” and “Obtain DNS server address automatically” on the General tab.
7. After all the all the information are correctly entered in the “Internet Protocol (TCP/IP) Properties” window, click “OK” to finish. Using Both DHCP and Static IP for Connection to Internet When you are alternatively using networks with either DHCP or static IP addressing, you can use alternative settings that enable simultaneous configurations of DHCP and static IP to use both of the network connects without reconfiguring. 1.
3. When you have completed the entire configuration, click “OK”.
Using Wireless LAN Network for Connection to Internet (Microsoft’s Service Pack 2) (Optional) 40
RUNNING BIOS SETUP Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS.
• Advanced - Use this menu to enable and make changes to the advanced features available on your system. • Security - Use this menu to set a password. The password allows boot up and controls access to the BIOS setup menu. • Boot - Use this menu to configure the default system device used to locate and load the Operating System and for booting up the Notebook. • Exit - Use this menu to exit the current menu or specify how to exit the Setup program.
End PgDn Moves the cursor to the field at the bottom of the window. F9 Sets the parameters for the current menu to their default values. F10 Save and Exit. Enter Will select a sub menu or show a range of options for a field. Launching Submenus Note that a right pointer symbol è appears to the left of certain fields. This pointer indicates that a submenu can be launched from this field. A submenu contains additional options for a field parameter.
The Main Menu When the Setup program is accessed, the following screen appears: 44
The Advanced Menu Selecting Advanced from the menu bar displays the advanced menu: 45
The Boot Menu The Boot menu allows the user to specify the order in which the Notebook is to check for a device to boot the system. You can also configure the way that the system will boot up. To make changes, select Boot from the menu bar.
The Security Menu The Notebook’ s advanced system of security allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup Program. Use the up and down arrows to select the boot device. Then press either the plus key [+] to move the device up the list or the minus key [-] to move the device down the list.
The Exit Menu Once you have made all of your selections from the various menus in the Setup program, you should save your changes and exit Setup.
VGA UTILITIES VGA Utilities After you have restarted Windows, open the “Control Panel” and double click on the “Display” icon. From the “Display Properties” window, select the “Settings” tab and click on the “Advanced” tab to enter the “ATI CATALYST Control Center" window.
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
TROUBLESHOOTING This chapter describes locating and solving problems that you may encounter while using your computer. Locating a Problem Problems with your computer can be caused by something as minor as an unplugged power cord – or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems. If you try all the suggested solutions and you still have a problem, make a list of what steps you have taken to correct the problem and contact your dealer.
If you are using the Notebook with the AC adapter, check the power outlet, the power cord, and any power switches that may affect your computer. 8. Check the wall outlet or power strip with an item that you know is functioning properly. A lamp or radio is a convenient item for checking the power. You may also need to check the fuses and breakers in your electric box. 9. If the outlet is controlled by a wall switch, make sure that the switch is on. 10.
Two classifications of malfunctions can be detected during the POST: • Error messages that indicate a failure with either the hardware, the software, or the Basic Input/Output System (BIOS). These critical malfunctions prevent the computer from operating at all or could cause incorrect and apparent results. An example of a critical error is microprocessor malfunction. • Messages that furnish important information on the power-on and boot processes (such as memory status).
Solution: The problem is beyond the scope of this manual. Contact technical support. Problem: An unidentified message is displayed. Solution: Reboot the computer and run the BIOS system setup. Confirm the Setup parameters. If the same message is displayed after booting up again, contact technical support for assistance. Problem: The system cannot access the CD-ROM/DVD-ROM drive. Solution: Check that a CD is properly inserted in the drive. Make sure that you are using the correct program for that kind of CD.
UPGRADING YOUR SYSTEM 69
Upgrading your System CPU Refer to the following illustration on upgrading your notebook's CPU Be sure to loosen all the screws first before removing it totally to release the heatsink. Failure to do so will cause a major damage to the heatsink.
Upgrading your Memory (1) Upgrading your Memory (2) 71
The Easy to Upgrade HDD Module The hard drive in your notebook computer is made to be easily swapped out for upgrading.
SPECIFICATION Detailed Notebook Specifications Processor • Intel® Pentium® M L2 cache=2MB on die, FSB=533MHZ • Intel® Celeron® M L2 cache=1MB on die, FSB=400MHZ • 479 pin uFC-PGA2 package Operating System Compliance • Microsoft® Windows ® XP Professional Edition • Microsoft® Windows ® XP Home Edition Core Logic • ATI RC410MB+SB450 Memory • Expansion 2 slots of 200pin DDR2 SO-DIMM SDRAM module, 2GB total memory capacity • Support DDR2 533 Module LCD Display • 15.
AV Feature Built-in TV Tuner • • Mini PCI TV Tuner (optional) w/ Coaxial connector, support PAL, NTSC, SECAM Support capture function to record the TV programs into Hard Disk Remote Control • Multi-function remote control to enjoy TV program (optional) Pointing Device • Synaptics touchpad Application Launch Key • WLAN, Email, Internet, Power LED Status Indicator • Power, Suspend/Resume, Battery Charging Status, Hard Disk Access, NumLock mode, CapsLock mode, ScrollLock mode Keyboard • 3.
Card Reader • 3-in-1 card reader (Support SD/MS/MMC) (optional) Communication • 10/100/1000 Base-T LAN on board • Built-in MDC 56Kbps FAX/Modem • 802.11g MiniPCI WLAN card (optional) (Qcom Q802MKG) Power Management • ACPI 2.0 compliance • Support Stand-by, Suspend to Disk, Suspend to RAM Security • Kensington Lock, BIOS password protection Size • 355.0(W) x 273.0(D) x 40.0(H)mm Weight • 2.85 kg with 15.
EC DEC LARATIO N O F C O NFO RMITY (EURO PE) He re b y, Elite g ro up , d e c la re s tha t this p ro d uc t is in c o m p lia nc e w ith the e sse ntia l re q uire m e nts a nd o the r re le va nt p ro visio ns o f Dire c tive 1999/ 5/ EC a s liste d b e lo w Artic le 3.1(a ): EN 60950, EN50371 Artic le 3.1(b ): EN 301 489-1, 301 489-17 Artic le 3.2: EN 300 328 0976 C autio n: This e q uip m e nt is inte nd e d to b e use d in a ll EU a nd EFTA c o untrie s.
Fe de ra l C o m m unic a tio n C o m m issio n Inte rfe re nc e Sta te m e nt This e q uip m e nt ha s b e e n te ste d a nd fo und to c o m p ly w ith the lim its fo r a C la ss B d ig ita l d e vic e , p ursua nt to Pa rt 15 o f the FC C Rule s. The se lim its a re d e sig ne d to p ro vid e re a so na b le p ro te c tio n a g a inst ha rm ful inte rfe re nc e in a re sid e ntia l insta lla tio n.
78