Electric Motorized Projection Screen PowerMax Series User’s Guide Rev.123011-AS www.elitescreens.com info@elitescreens.
Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedure below. Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
Installation Warning Due to various installation environments, the instructions provided in this user’s guide are for reference only. Please consult a professional installation company for further installation and safety advice. The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty installations. The Screen’s Top Black Drop is already set to its maximum drop distance.
Hardware Parts List for the Powe PowerMax rMax Series 00 Please make sure all parts listed below are included before proceeding with the installation. installation a. d. Hardware Parts List a. Mounting Bracket b. M4x50 Screw c. M10 Anchor d. Suspended Ceiling Bracket Connector e. M5x15 Screw & Bolt f. Bubble Level Rev.123011-AS www.elitescreens.com b. c. e. f.. QTY 2 4 4 2 4 1 info@elitescreens.
Installation Instructions Please consult a professional Installer. Elite Screens is not liable for faulty installations. Flush Mount to the Wall 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c). 2. Install the Mounting Brackets (a) to the wall and secure with the M4x50 Screws (b). MouMounting Bracke Mounting Bracket Fix Plate 1 Anchor M4x50 Screw Mounting Bracket Fix Plate 2 Wall Rev.123011-AS www.elitescreens.
3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first fix plate, and securing the back of the case to the second Fix Plate. Make sure the case slots are securely attached to the Mounting Bracket. Mounting Bracket Fix Plate 1 Mounting Bracket Fix Plate 2 Mounting Bracket Case Slot 1 Case Slot 2 Screen Case Rev.123011-AS www.elitescreens.com info@elitescreens.
Flush Mount to the Ceiling 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c). 2. Install the Mounting Brackets (a) to the ceiling and secure with the M4x50 Screws (b). Ceiling M10 Anchor Mounting Bracket Fix Plate 1 M4x50 Screw Mounting Bracket Fix Plate 2 3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first Fix Plate, and securing the back of the case to the second Fix Plate.
Suspended Ceiling using Chains (additional hardware required) 1. You can also hang the screen on a ceiling by using chains (not included included). 2. Connect the Suspended Ceiling Bracket Connector (d) to the Mounting Bracket (a) and secure with the M5x15 Screws & Bolts (e). M5x15 Bolt (e) Suspended Ceiling Bracket Connector C (d) Mounting Bracket (a) M5x15 Screw (e) 3. Insert chains (not ot included) through the loop holes of the Suspended Ceiling Bracket Connector (d).
Built in 3 Way Control Switch 1. The PowerMax Series comes omes with a 3 Way Control Switch attached to the Power Cord, which is 3.5 meters in length. 2. Use the provided Bubble Level (f) to ensure the screen is level before plugging in the power cord. 3 Way Control Up/Stop/Down Switch Bubble Level (f) Remove Screen from Mounting Brackets 1. Pull down on the Mounting Bracket Release Tab and remove the bottom of the case first, away from the wall/ceiling,, followed by the top of the case.
ZPM-RT RT Optional Remote Control Kit for PowerMax Series 1 Please contact Elite Screens to purchase the optional ZPM-RT Remote Control Kit. 4 A. IR Remote B. RF Remote 55” C. 3 Way Wall Switch D. AAA Battery x 2 110” Red+ Green - E. 12V Trigger Rev.123011-AS www.elitescreens.com F. IR Eye Receiver info@elitescreens.com G.
ZPM-RT Installation & Control Instructions 1 1 1. Disconnect the 3 Way Control Switch from the PowerMax Screen as shown below. 3 Way Control Switch Screen 2. Connect the Wall Box (G) to the screen as shown below. Wall box (G) Rev.123011-AS www.elitescreens.com info@elitescreens.
ZPM-RT Installation & Control Instructions 2 1 Please consult a professonial installer for this procedure. Elite Screens is not responsible for faulty installations. 1. Cut the cable of both the Wall Box (G) and the attached Control Switch to expose the wires. Cut Cable Cut Cable Wall Box (G) 2. Connect the wires from the screen to the Wall box (G) according to their specific color.
3 Way Wall Switch (C) 1. Connect the 3 Way Wall Switch (C) to the Wall Box (G) and mount on wall. Wall Box (G) 3 Way Wall Switch (C) 12 Volt Trigger (E) 1. Connect the 12 Volt Trigger (E) to the Wall Box (G) for set up to your projector. Wall Box (G) 12 Volt Trigger (E) Red Wire DC12V Green Wire 0V Connect to Projector IR Eye Receiver (F) 1. Connect the IR Eye Receiver (F) to the Wall Box (G) for high wall or ceiling installations Wall Box (G) IR Remote (A) IR Eye Receiver (F) Rev.123011-AS www.
PowerMax Dimension Table Measurements are intended as a reference only and are subject to change without notice. Note: Data Error may be ±1" Unit: mm Rev.123011-AS www.elitescreens.com info@elitescreens.
Warranty Policy • • • • • • • • Two (2) Year parts and labor warranty from defects in workmanship from purchase date as follows (except for refurbished units as specified below). Three (3) Year parts and labor warranty from defects in workmanship for GEMR (Government, Educational, Military, & Religious) purchases of new product only. Refurbished Units carry a 90-DAY parts and labor warranty. Each party will be responsible for one way shipping during the warranty period.
Contact Information US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 or fax +1-562-926-8433 Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958 Asia Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
