User`s guide

ManualsBrandsElite Screens ManualsProjection ScreenPowerMax Series

Rev.072512-JA 1 www.elitescreens.com/epv

PowerMax / PowerMax Pro

Series

Electric/Motorized Front Projection Screen

User’s Guide

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedures below.

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black

Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved

changes or modifications (except for cutting the power cord for hardwire installations) to this unit are

prohibited and will void your warranty. For more information, please contact our Technical Support

Department at (877) 511-1211 Ext. 604.

 Please retain this user’s guide for future reference.

 To avoid damaging the unit, do not use with any unauthorized accessories not recommended by

the manufacturer.

 Handle the unit carefully during transportation to avoid any damages.

 To ensure safe and reliable operation, direct connection to a properly grounded power source is

advised.

 The power outlet supplying power to the unit should be close to the unit and easily accessible.

 Do not install the unit on uneven or inclined surfaces.

 Do not put heavy objects on the power cord and position it properly to avoid creating a trip

obstacle.

 Never overload the power cord to prevent an electric shock or fire due to a loose contact or a

short circuit.

 There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by

yourself. No one except authorized technicians can open and make repairs to this unit.

 Make sure the power source this unit is connected to has a continuous power flow.

 If there is need to use an extension cord, make sure the cord has an equal rating as the appliance

to avoid overheat.

 Do not handle the power plug when your hands are wet or your feet are in contact with water.

Summary of content (9 pages)

PAGE 1
PowerMax / PowerMax Pro Series Electric/Motorized Front Projection Screen User’s Guide Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedures below. Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens.
PAGE 2
Do not use this unit under the following circumstances.       Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning. Avoid direct Sunshine, rain shower and moisture. Keep away from fire sources and high temperature to prevent this device from overheating. Cut off the power supply first before transportation or maintenance.
PAGE 3
Hardware Parts List for the PowerMax Series Please make sure all parts listed below are included before proceeding with the installation. a. b. c. Hardware Parts List d. e. f. a. Mounting Bracket b. M4x50 Screw c. M10 Anchor d. Suspended Ceiling Bracket Connector e. M5x15 Screw& Bolt f. Bubble Leveler Installation Instructions Please consult a professional Installer. Elite Screens is not liable for faulty installations. Flush Mount to the Wall 1.
PAGE 4
Mounting Bracket Mounting Bracket Fix Plate 1 Mounting Bracket Fix Plate 2 Case Slot 1 Case Slot 2 Screen Case Flush Mount to the Ceiling 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c). 2. Install the Mounting Brackets (a) to the ceiling and secure with the M4x50 Screws (b). Ceiling M10 Anchor Mounting Bracket Fix Plate 1 M4x50 Screw Mounting Bracket Fix Plate 2 3.
PAGE 5
Fix Plate 1 Fix Plate 2 Suspended Ceiling using Chains(additional hardware required) 1. You can also hang the screen on a ceiling by using chains (not included). 2. Connect the Suspended Ceiling Bracket Connector (d) to the Mounting Bracket (a) and secure with the M5x15 Screws& Bolts (e). M5x15 Bolt (e) Suspended Ceiling Bracket Connector (d) Mounting Bracket (a) M5x15 Screw (e) 3. Insert chains (not included) through the loop holes of the Suspended Ceiling Bracket Connector (d).
PAGE 6
How to remove the screen from Mounting Brackets 1. Pull down on the Mounting Bracket Release Tab and remove the bottom of the case first, away from the wall/ceiling, followed by the top of the case. Release Tab Pull Bottom of case first away from wall/ceiling. ZPM-RT Optional Remote Control Kit for PowerMax Series (Standard for PowerMax Pro)1 Please contact Elite Screens to purchase the optional ZPM-RT Remote Control Kit. E F. In-wall RJ45 module 55” A. B. IR Remote RF Remote Red+ C.
PAGE 7
ZPM-RT Installation & Control Instructions1 1. Disconnect the 3 Way Control Switch from the PowerMax Screen as shown below. 3 Way Control Switch Screen 2. Connect the Wall Box (G) to the screen as shown below. Wall box (G) Screen ZPM-RT Installation & Control Instructions 2 Please consult a professonial installer for this procedure. Elite Screens is not responsible for faulty installations. 1. Cut the cable of both the Wall Box (G) and the attached Control Switch to expose the wires.
PAGE 8
2. Connect the wires from the screen to the Wall box (G) according to their specific color. Purple Wire = Up Orange Wire = Down Yellow Wire = Common Yellow & Green Wire = Ground Purple Wire = Up Orange Wire = Down Yellow Wire = Common Yellow & Green Wire = Ground 3. The Wall Box (G) should be connected to your screen as shown below. Wall Box (G) 3 Way Wall Switch (C) 1. Connect the 3 Way Wall Switch (C) to the Wall Box (G) and mount on wall. Wall Box (G) 3 Way Wall Switch (C) Rev.072512-JA 8 www.
PAGE 9
12 Volt Trigger (E) 1. Connect the 12 Volt Trigger (E) to the Wall Box (G)for set up to your projector. Wall Box (G) 12 Volt Trigger (E) Red Wire + DC12V Green Wire 0VConnect to Projector IR Eye Receiver (F) 1. Connect the IR Eye Receiver (F) to the Wall Box (G) for high wall or ceiling installations Wall Box (G) IR Remote (A) IR Eye Receiver (F) For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com Rev.072512-JA 9 www.elitescreens.