User Manual

Notice to Installer:
Please use the following installation instructions to obtain superior optical performance from the
CineGrey 5D®/CineGrey 3D®/StarBright 4 Angular Reflective ALR (Ambient Light Rejecting) Screen.
•Angular-Reflective material is not compatible with ultra/short-throw projectors
•To use short-throw projectors you will need a 0.8 lens throw ratio or greater
•Ambient light must not come from the same direction as the projector
Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is
important to position the projector so that the viewer will get the best possible image.
Step 1: Establish the general “eye level” of the viewers
Step 2: Set the appropriate projection level
Step 3: Adjust the screen height level and projection angle
Input Angle (A) = Output Angle (B) aligns with the viewer’s angle
www.Elitescreens.com