User's Manual

ManualsBrandsELITE OPTOELECTRONICS ManualsElectronicsLaser Shooting Target

LET-100 Laser Electronic Target User

Manual

Please read this manual carefully before use, please keep it for further reference.

Due to continuous product improvement, the LET-100 laser electronic target you purchased

may not be exactly the same as the instructions in the manual. We apologize for it.

1. Product Overview

The laser electronic target is using a laser pulse as real bullet for simulative shooting training

system. It can work with any pulsed laser bullet or semiconductor pulse laser gun on the

market. There are 4 basic functions such as free shooting, timing shooting, counting shots,

and electron voice prompt shooting. While, electron voice ring prompter and large size LED

display shooting ring number can meet various training scenes. The target has a built-in

rechargeable lithium-ion battery with a standby time of more than 8 hours and can guarantee

more than 4 hours running time for general training scene.

2. Technical parameters

2.1 Laser electronic target parameters

Working voltage: 3.5-4.3VDC (built-in lithium-ion battery working voltage)

Battery capacity: 1100mAh

Standby time: >5 hours

Working current: <300mA

Charging voltage: 5V ± 10% adapter

Charging current: <500mA

Target effective diameter: 178mm

Shooting trigger interval: 0.2s

Response wavelength: 400~1100nm

Adapt to laser spot size: 5-10mm

Laser pulse peak power: <5mW

Single pulse width: 10-100ms

Shooting distance: >20m

Working environment temperature: -10~40°C

Storage temperature: -30~85°C

Humidity range: 30~75% RH

2.2 RF remote control parameters

Working voltage: 12V (23A type disposable dry battery)

Transmission frequency: 433.92MHz

Transmit power: <10mW

Modulation method: ASK/OOK

Number of coding groups: 4

Summary of content (6 pages)

PAGE 1
LET-100 Laser Electronic Target User Manual Please read this manual carefully before use, please keep it for further reference. Due to continuous product improvement, the LET-100 laser electronic target you purchased may not be exactly the same as the instructions in the manual. We apologize for it. 1. Product Overview The laser electronic target is using a laser pulse as real bullet for simulative shooting training system.
PAGE 2
Remote control distance: >20m Working environment temperature: -10~40°C Storage temperature: -30~85°C Humidity range: 30~95% RH 3. Structure drawing 1. target plate photosensitive surface 2. LED digital tube 3. LED three-color indicator 4. speaker 5. charge interface 6.
PAGE 3
1. 2. 3. 4. Remote control transmitter indicator A button B button C button 5. D button 4. Operational manual 4.1 Power supply Built-in 1100mAh rechargeable Li-ion battery with 5V/2A charger. Please make sure power supply is at its normal range before using the product. 4.2 LED Tri-color indicator LED-Red： battery is charging. LED-Green： battery is full. LED-Blue： Flashes for detecting every effective shooting. 4.
PAGE 4
total scores will be displayed at the end of the time. Press button D on the remote to start a new round. F-3, Counts shooting, within the preset counts, broadcasting every effective shooting and total scores will be displayed at the end of the counts. Press button D on the remote to start a new round.
PAGE 5
detected; F-2 selected and countdown, total score will be displayed at the end of countdown; F-3 selected and display the remaining counts of shooting, total score will be displayed when the counts are over; F-4 selected and 10s random countdowns start, shoot at the hint and total score and time will be displayed after the shooting. Long press: Press D button more than 10s will enter PT array self-checking mode and press for another 10s will get back to game mode. 5. Cautions 5.
PAGE 6
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.