Elite Acoustics Engineering StompMIX 4 4 Channels Digital Mixer Pedal Quick Guide Handbook - V1.02 48V CH2 OUT2 OUT1 CH1 A page parameter system B StompMix 4 WHAT IS IN THE BOX Your StompMix 4 package contains the following: (1) StompMix 4 unit (1) AC to 12VDC Power Supply Adapter NOTE: Due to continuous development and improvements of our products, features and specifications are subject to change without notice. All weights and measures are approximate.
CH2 OUT2 OUT1 CH1 A page parameter system B StompMix 4 LCD FUNCTIONS Menu Buttons with LCD: Press any of the 3 menu buttons(black button located to the below theLCD) or 4 encoders(blue knobs located around LCD) to access and adjust features and settings. Most menus have several pages of options, which are adjusted by turning the corresponding encoder. “MUTE” HOLD down the Corresponding encoder to MUTE or UNMUTE each channel.
page parameter system PRESS the “page” button to access these FUNCTIONS “Main Mix” Adjust the level of each of the 4 channels sent to the Main MIX Outputs. “Delay Mix” Select the Chan which delay is inserted and Delay Mix Level. “Aux Mix” Adjust the level of each of the 4 channels sent to the Aux Mix Outputs. “Reverb Send” Adjust the Reverb Send level of each of the 4 channels.
page parameter system PRESS the corresponding Encoder knob for these Functions. use the corresponding Encoder knob for these Functions. “Channel EQ” Adjust for each channel Low Mid Mid Freq High “Channel Util” - more details on next page. Polarity (=) or (-) Notch Filter Filter - Off/Highpass/Notch Filter Freq.
page parameter system use the corresponding Encoder knob for these Functions. “Channel Util” Input Phase Polarity is (-) Reversed. Notch - 76 Hz. Filter - Notch 56 Hz. “Channel Util” Input Phase Polarity is (=) - NOT reversed. Notch - OFF Filter - OFF Filter Freq. - 84 Hz. “Channel Util” Input Phase Polarity is (-) Reversed. Notch - OFF Filter - HiPass Filter Freq. - 84 Hz.
Editing “Main Mix” parameters page parameter system PRESS the “parameter” button to access these FUNCTIONS Preset “Parameter” key Adjust the Main Mix stereo panning for each of the 4 channels. Preset “Parameter” key Adjust the Main Mix output Level.
Editing “Aux Mix” parameters page parameter system PRESS the “parameter” button to access these FUNCTIONS Preset “Parameter” key Adjust the AUX stereo panning for each of the 4 channels. Preset “Parameter” key Adjust Aux Send connection - “Pre” or “Post” Pre - Pre “Main Mix level” Post - Post “Main Mix level” ““ Adjust the Aux Mix output Level.
Editing “Delay Mix” parameters page parameter system PRESS the “parameter” button to access these FUNCTIONS page parameter system Preset “Parameter” key Adjust the 4 Delay Parameter by the corresponding encoder knobs.
Editing “Reverb Send” parameters page parameter system PRESS the “parameter” button to access these FUNCTIONS page parameter system Preset “Parameter” key Adjust the 4 Reverb Parameter by the corresponding encoder knobs.
page parameter system PRESS the “system” button to access these FUNCTIONS Input Meters It is critical to adjust the normal input levels to be below -12db level to avoid Clipping the inputs of the StompMix 4. Distortion can occur when inputs are clipping. CHAN 1 and CHAN 2 have input level knobs and PAD switches, CHAN 3 and CHAN 4 require input level control from the extenal device. “Memories” There are 10 scenes that can be save. Use the Corresponding encoder to make changes.
48V CH2 OUT2 OUT1 CH1 A page parameter system B StompMix 4 “Memories” Mem - indicated the Memory slot # Clear - to Clean Memory slot indicated Store - to Store Memory slot indicated. “Press” and“Hold” - push/hold the Encoder. Recall - to recall the memory indicated. “Push” - quick press ONLY. DO NOT hold.
page parameter system USE the corresponding Encoder knob for these Functions.
48V CH2 OUT2 OUT1 CH1 A page parameter system B StompMix 4 USE the corresponding Encoder knob for these Functions. Assign “OUT1” and “OUT2” output routing “Assigns” “AUX” Mix output to OUT1 “MAIN” Mix output to OUT2 “Assigns” “MAIN” Mix MON and “AUX Mix MONO output to OUT1 (L/R) “AUX” Mix output OUT2 “Assigns” OUT1 and OUT 2 routing are selectable from 3 seperate output mix.
Rear Panel. 1) USB mini jack (for Updating unit.) 2) DC input Jack (+12VDC Center Positive.) Unit will operate from +9VDC to +12VDC “Must be Center Positive” 3) +48V phomton power switch - Both CHAN 1 and CHAN 2. 4) CHAN 1 LEVEL and PAD 5) CHAN 2 LEVEL and PAD 6) CHAN 3 input OUTPUTS OUTPUT 2 1/8” Jack. OUTPUT 1 L/R 1/4” Jacks. CHAN 1/2 CH2 OUT2 OUT1 CH1 A page parameter system StompMix 4 B Combo Jack input. MIC or 1/4” Line Inputs.
SYSTEM SPECIFICATIONS • System Architecture : Ultra high-speed high-capacity DSP with lossless A/D and D/A conversion. Integrated Digital Mixer supports routing and seamless signal-level management for four fully configurable audio channels. Color Graphic LCD presents a highly intuitive GUI for settings and save & recall.
Legal Notice: CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. WARRANTY (USA ONLY) Contact the Distributor in your area for service and warranty info. Elite Acoustics Engineering Inc.