User's Manual

User manual
1． Functional schematic diagram （TWO MOTORS）
1. Description of Power
Host is equipped with Switching power supply（DC12V、1.25A）.This machine is
the maximum current not more than 1.2A when the rated load weight.When current
more than 1.2A : Buzzer will alarm in the host, and one second later ,SCM detect
the fault and then disconnect motor power automatically to protect the Host.
2. Instructions
1) Turn on the power, the TV Mount will turn back to midpoint automatically,then
contraction, return and turn off.
2) Press the button “OPEN” on the remote, the TV Mount will extend a nd stop .
3) Press the button “LEFT,RIGHT,DOWN” to adjust the angle that you want.
4) Hold the button “MEMORY” long time and adjust the angle you want, then press
the button “MEMORY” again, the red light turn off and this angle is saved.
5) Press the button “OPEN” again, the TV Mount will turn back to midpoint
automatically, then contraction, return and turn off; if you want to turn
on again, press the button “MEMORY” only, then the TV Mount will restore
the angle that you saved before turn off.