How-To Guide

`
Water Detector
What’s included?
How to use?
Water Detector-Front
view
Water Detector-Back
view
Magnet located
under grips
How to use?- without the remote lead
You can use the Water Detector to monitor most appliances and pipes for leaks
without the remote lead. Once paired with your Guardian Valve Controller, place the
Water Detector on a at surface under the item you want monitored where water
will collect if it leaks from above.
Base moulding
SOLIDWORKS Educational Product. For Instructional Use Only.
Water Detector can be made
to rest against 3-1/4” base
moulding for placement near
a wall
SOLIDWORKS Educational Product. For Instructional Use Only.
Leaking Water Sensor
Water Detector can also
detect water that col-
lects under it due to a
leakage
SOLIDWORKS Educational Product. For Instructional Use Only.
Remote Lead
Remote Senosor
Metal Feet
How to use?- with the remote lead
Mount the Water Detecto-
ron a metallic surface of an
appliance using the magnets
on it’s back and place the
remote lead in the area you
want to montitor.Make sure
the remote lead is laying at
with its metal feet making
full contact with the oor or
surface.
Use the remote lead with the Water Detector to detect leaks in hard-to-reach areas.
The remote lead plugs into the Water Detector through the 3.5mm mini jack.
SOLIDWORKS Educational Product. For Instructional Use Only.
Remote Lead un-
der the appliance
Appliance
Leak Sensor
SOLIDWORKS Educational Product. For Instructional Use Only.
What’s included?
SOLIDWORKS Educational Product. For Instructional Use Only.
SOLIDWORKS Educational Product. For Instructional Use Only.
Sensors to detect water
Sensor to detect temperature
Sensors to detect water
PIN
1. After installing and conguring your Guardian Valve Controller with the Guard-
ian App, follow instructions on the App to include your Water Detector to the
system.
2. Click on “Add new Device” > “set up a new sensor” and enter the pin number
located on the back of the Water Detector
Model:LWGLD1