User's Manual
Usermanual–ELAMMD
1． Functionalschematicdiagram
2.Instructions
1) Changecolormanually .
AccordingtotheFunctionalschematicdiagram,linktheoutputterminal,LEDlamppipeand
powerinput,pressthemiddlebutton(”MODEL”)toturnon,it willflashinakindofcolor,
pressthisbuttonordinaltocontroltheAmbientlightforchangingcolors(changesevencolor
most).
Pressthebuttoneighthtimetoturnoff(otherbuttonsto lose effectiveness).
2)Changecolor
automatically .
Press the button “MODEL” to turn on, hold on two seconds, Enter the automatic mode. Now
the
Ambient light will change color automatically every five seconds. Press the right button
“UP” to speed up the speed of changing color, when press the button fifth, the
Ambientlight
will change color
automatically every seconds. Press the left button “DOWN” decelerate the
speed of changing color, when press the button fifth, the
Ambient light will change color
automatically every seconds.
3)Press the button “MODEL” again, turn back to the a kind of color mode, now change color
manuallyandpressthebutton“UP”toturnonsoundcontrol,then
the Ambientlightwillflash
and change color
automatically according to the music. Press the button “MODEL” again; it
will flash in a kind of color. When it is flashing, press the button “MODEL” continuously to
enter “
changecolormanually” mode.