User's Manual

ManualsBrandsEleven Engineering ManualsElectronicsGemma

SKAA USER’S GUIDE

SKAA OS v2.3

Each SKAA® receiver has a Green List which remembers your favorite transmitters. A Green

indicator on the receiver means you are listening to a favorite, or hunting for one. Your receiver

can also explore to find new transmitters. An Amber indicator means you are exploring—looking

for transmitters which are not on your Green List. A Cluster is a product with two or more

pieces which behave as one, such as a left and right speaker pair. The Bond Button lets you

select which transmitter you’re listening to. The Bond Button has the or logo.

Essentials

Bond Button

Command

LED Meaning

Click

Favorites Hunt through your Green List of

favorite transmitters. Click again to switch

between hunting for all transmitters on your

Green List and only the current one

(dim) = Hunting

(flash) = Next one

(solid) = Bonded

2 Clicks

Explore Hunt for new, unknown transmitters

(ones which are not on your Green List already)

(dim) = Hunting

(solid) = Bonded

Hold

(a few seconds)

Add / Delete Manually add / delete the current

transmitter to / from your Green List

to = Added

(flash) = Deleted

Auto Add SKAA adds the current Amber

transmitter to your Green List if you listen to it

for 30 minutes

to = Added

More Commands

Bond Button

Command

LED Meaning

3 Clicks

Mute / Unmute Note—every Click command

will first Unmute and then perform its function

or (slow flash) = Muted

4 Clicks

Swing Mode Bond to any transmitter on your

Green List (hint: have just one powered on)

(dim) = Hunting

(solid) = Bonded

6 Clicks

Factory Reset Start over!

(flash) = Green List cleared

Hold during

power on

Make a Cluster of receivers:

1. Make sure the transmitter is powered off

2. Power on the Master receiver while holding

down its Bond Button—hold the button

down until the Red LED begins to flash

3. With the remaining receivers within 3

meters of the Master receiver, power on

the first one, wait for its Red LED to flash

and then power on the second one.

Continue until all of them are powered on.

4. Once all of the LEDs stop flashing (turn

solid Red), power off all of the receivers

(flash) = Master receiver

has entered

‘Cluster Up’ mode

(solid) = The Cluster has

been successfully

made

Summary of content (3 pages)

PAGE 1
SKAA USER’S GUIDE SKAA OS v2.3 Each SKAA® receiver has a Green List which remembers your favorite transmitters. A Green indicator on the receiver means you are listening to a favorite, or hunting for one. Your receiver can also explore to find new transmitters. An Amber indicator means you are exploring—looking for transmitters which are not on your Green List. A Cluster is a product with two or more pieces which behave as one, such as a left and right speaker pair.
PAGE 2
QUESTIONS AND ANSWERS Question Answer How does the Green List work? Every time you add a transmitter, it is automatically assigned the first open spot on the Green List—so if you already have two transmitters on your Green List, the next one you add will go in Green List spot #3. The receiver can hunt through the Green List much like a car radio hunts for radio stations when you press “seek”.
PAGE 3
Compliance Information The statements for SKAA device Model numbers PL5559 (Gemma) is as follows: FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.