Installation Instructions

ManualsBrandselero GmbH Antriebstechnik ManualsElectronicsTubular Motor with Electronic Limit Switch

Roller shutter drive SunTop-915

120 V / 60 Hz

138186806_US+CA_0513

Roller shutter drive SunTop-915

120V / 60Hz

1 Operating and installation

instructions

Please keep these operating instructions for later use and

have them available during the complete service life of the

product!

The German version of these operating instructions is

the original version.

All foreign language documents are translations of the

original version.

of design or utility patent.

2 General information

The structure of these operating instructions is based on

the service life phases of the electrical drive (subsequently

referred to as product).

The manufacturer reserves the right to make changes to the

technical data included in these operating instructions. The-

se may deviate from the respective model of the product

while the factual information are generally not changed and

are not losing their validity. The current state-of-the-art can

be obtained from the manufacturer at all times. Potential

claims cannot be asserted. Deviations from text and pictori-

al statements are not possible and depending on the tech-

nical development, setup and accessories of the product.

Deviating information on special models are included by the

manufacturer in the sales documentation. Other information

shall remain unaffected by this.

Table of contents

1 Operating and installation

instructions 1

2 General information 1

2.1 Standards and guidelines 2

2.2 Intended use 2

2.3 Foreseeable misuse 2

2.4 Warranty and liability 2

2.5 Customer service of the manufacturer 2

3 Safety 2

3.1 General safety instructions 2

3.2 Layout of safety instructions 2

3.3 General safety principles 3

3.4 General obligations of the operator 3

3.5 General requirements on personnel 3

3.6 Safety instructions on technical condition 4

3.7 Safety instructions on transport,

assembly and installation 4

3.8 Safety instructions on operation 4

3.9 Safety instructions on electrical installation 4

4 Product description 4

5 Installation 5

5.1 Mechanical mounting 5

5.2 Electrical connection 6

5.3 Connection example SunTop-915 120 V / 60 Hz 6

5.4 Parallel connection 6

5.5 Commissioning 6

5.5.1 Installation cable connection 6

5.5.2 Wireless connection (transmitter operation) 6

5.6 End position and relief settings 6

5.6.1 Relief function for end position(s) 7

5.6.2 Relief function at the upper stop 7

5.6.3 Relief function at the lower stop 7

5.6.4 Changing / deleting of end positions

and deleting the relief function 7

5.6.5 Programming or deleting additional

fabric positions 7

5.6.6 Four options for end position settings 7

5.6.7 Option A: Upper and lower end position

freely conﬁ gurable 7

5.6.8 Option B: Fixed upper end position,

lower end position freely conﬁ gurable 8

5.6.9 Option C:

Fixed upper and lower end position 8

5.6.10 Option D:

Upper end position freely conﬁ gurable,

ﬁ xed lower end position 8

5.7 Transmitter programming 8

5.8 Programming additional transmitters(s) 9

5.9 Technical data 9

6 Troubleshooting 9

7 Servicing 9

8 Cleaning 9

9 Repair 9

10 Address 9

11 Disposal / scrapping 10

12 EC Declaration of Conformity 10

13 US: Addendum to the manual

UL approval 10

14 CA: Addendum au manuel

Homologation UL 10

Summary of content (10 pages)

PAGE 1
Roller shutter drive SunTop-915 120 V / 60 Hz Table of contents 5.6.9 lower end position freely configurable 8 Option C: Fixed upper and lower end position 8 Operating and installation instructions 1 2 General information 1 2.1 Standards and guidelines 2 2.2 Intended use 2 2.3 Foreseeable misuse 2 2.4 Warranty and liability 2 2.5 Customer service of the manufacturer 2 3 Safety 2 3.1 General safety instructions 2 3.2 Layout of safety instructions 2 3.
PAGE 2
Standards and guidelines | Safety 2.1 2.2 Standards and guidelines • Improper use of the product During system design, basic safety and health requirements of applicable laws, standards and guidelines were observed. The safety is confirmed by means of the Declaration of Conformity (refer to „EC Declaration of Conformity“). All safety information in these operating instructions are based on currently applicable laws and regulations in Germany.
PAGE 3
Safety Symbol all national and international regulations applicable in the country of operation and other binding regulations on operational safety, prevention of accidents and environmental protection are complied with. All work on the product must only performed by trained, safety-related instructed and authorized personnel. Description Danger due to voltage, electrical shock: This symbol indicates dangers due to electricity. Fig.
PAGE 4
Safety | Product description 3.6 Safety instructions on technical condition 3.9  Prior to installation the product must be checked for damage and proper condition.  Work on the electric system of the used equipment must only be carried out by authorized electricians according to applicable rules and regulations by the trade association, particularly the provisions of DIN VDE 0100. Additionally, the national legal regulations of the respective country of operation must be observed.
PAGE 5
Installation | Mechanical mounting 5 Optimum use of the wireless signal. Installation ►Position the antenna as freely as possible and reposition it in case of bad reception. CAUTION ►Do not bend, shorten or extent the antenna. Risk of injury due to hot surfaces. The drive system gets hot during operation, therefore the housing may be hot. Risk of skin burns. ►Wear personal protective equipment (protective gloves). ►Observe the minimum distance between two wireless drive systems of 15 cm. 5.
PAGE 6
Installation: Electrical connection 5.2 Electrical connection 3 2 1 WARNING Danger to life due to incorrect electrical connection. Risk of electric shock. Fig. 5 ►Before initial commissioning, check the correct connection of the PE conductor. NOTE 5.4 Damage to the SunTop-915 due to incorrect electrical connection. ►Before initial commissioning, check the correct connection of the PE conductor. Damage to or destruction of the SunTop-915 due to ingress of humidity.
PAGE 7
Relief function | End position settings Important preliminary consideration: Before carrying out the end position settings, decide on a certain relief function (different combinations available according to the following models). 5.6.5 Programming or deleting additional fabric positions Intermediate position programming: refer to transmitter instructions. This will save you unnecessary time and effort during configuration! Ventilation position programming: refer to transmitter instructions.
PAGE 8
End position settings | Transmitter programming 5.6.8 Option B: Fixed upper end position, lower end position freely configurable 5.6.
PAGE 9
Transmitter programming | Troubleshooting | Repair 5.8 Programming additional transmitters(s) A maximum of 16 transmitters can be programmed. Programming additional transmitters(s) Instruction Result For three seconds, on a already programmed transmitter press simultaneously for 3 seconds the UPbutton ▲, the DOWNbutton ▼ and the programming button P. The status indicator flashes. The drive system is in programming mode (up and down movement).
PAGE 10
Declaration of Conformity | UL approval | Homologation UL 11 Disposal / scrapping 13 After unpacking the system, dispose of the packaging material according to applicable regulations. US: Addendum to the manual UL approval After the last use, dispose of the product according to applicable regulations. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.