Manual

AC/DC Variable

Power Supply

Instruction

Manual

Model XP-625

ELENCO

150 Carpenter Avenue

Wheeling, IL 60090

(847) 541-3800

Website: www.elenco.com

e-mail: elenco@elenco.com

REV-F Revised 2011

SCHEMATIC DIAGRAM

AC/DC Variable

Power Supply

Model XP-625

REV-E

Read this manual before

operating unit.

PAGE 1
SCHEMATIC DIAGRAM AC/DC Variable Power Supply Model XP-625 AC/DC Variable Power Supply Instruction Manual Model XP-625 Read this manual before operating unit. ELENCO® REV-E 150 Carpenter Avenue Wheeling, IL 60090 (847) 541-3800 Website: www.elenco.com e-mail: elenco@elenco.
PAGE 2
INTRODUCTION OPERATING INSTRUCTIONS The XP-625 contains three non-filtered, non-regulated voltages: 0-30VDC @ 5A, 0-40VAC @ 5A, and 0-110VAC @ 2.5A. All three supplies are controlled by the voltage adjust knob on the front panel. The unit contains a volt and amp meter. The volt meter is used for both 30VDC and 40VAC output voltages. The amp meter only registers the DC output current. The outputs are fuse protected from overload or shorting.