ESBAB21RTR 2.1 Sound Bar USER MANUAL FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT EE20_0082d_ESBAB21RTR_User_Guide.
WHAT’S INCLUDED FOR YOUR ATTENTION Your new sound bar & subwoofer! Power cable x 2 HDMI cable Remote + ++ + _ _ _ _ 2 AAA remote batteries 2 mounting screws and 2 wall plugs • Please read through this manual before making connections and operating this product. Retain this manual for future reference. • Do not open the cabinet of this unit. No user-serviceable parts inside. Refer servicing to qualified personnel only. • Switch off the unit when not in use.
MOUNTING YOUR SOUND BAR ON A WALL MOUNTING YOUR SOUND BAR ON A WALL (continued) In order to prevent injuries, the sound bar device must be fastened securely to the wall in accordance with the below installation instructions. Drill two holes into the wall (about 6mm diameter). Keep the distance between drill holes 660mm apart. Insert the two supplied plugs into the holes, then insert the supplied screws and tighten. 660mm Hang the assembled sound bar on the screws in the wall.
SOUND BAR PANELS SOUND BAR PANELS (continued) Front 1 1 Speaker 2 2 Back 3 1 Side 8 AC IN Display screen 9 HDMI (ARC) 3 Remote sensor 10 USB 4 Power Turn sound bar on or off 11 OPTICAL 5 Source Select input audio source 12 AUX IN 6 Volume Up Turn up audio volume 7 Volume Down Turn down audio volume 6 EE20_0082d_ESBAB21RTR_User_Guide.indd 6-7 4 6 5 7 USER MANUAL 10 8 FOR SUPPORT, VISIT ELEMENTELECTRONICS.
CONNECT TO YOUR TV CONNECTIONS Optical Connect your sound bar to your TV or other external devices such as a CD, VCR, DVD player, etc. by connecting an optical input cable (cable not included) to your sound bar and the optical output of your external device. There are 3 ways to connect your sound bar to the TV: 1 HDMI (ARC) Best Quality (cable included) 2 Optical Better Quality (cable not included) 3 Aux Good Quality (cable not included) This sound bar is Roku TV ReadyTM certified.
CONNECTIONS CONNECTIONS (Continued) Bluetooth Press STANDBY button on the remote control to power on the sound bar, then press SRC button on the remote control to switch the Bluetooth mode. The word BT will be shown on the display screen. Connecting the subwoofer to the soundbar: If after several seconds you do not see BT on the screen, the sound bar is still searching for a signal and you can follow these steps: Pairing a device or connecting a paired device: 1.
REMOTE CONTROL BASIC PLAYBACK A Press to switch on the unit. Press it again to put the unit in standby mode. Remote Control Operation Insert the battery into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 8 meters from the sensor and within an angle of about 30 degrees from the left and right side. Battery Installation Remove the battery compartment cover on the back of the remote. + _ _ + Load two AAA/1.
LET’S REGISTER YOUR PRODUCT WE’RE HERE TO HELP Find resources and get help for product setup, connecting devices, technical issues, downloading manuals and more! www We’re available 24 hours a day, 7 days a week It’s super easy, just head on over to elementelectronics.com/register elementelectronics.com 1.888.842.3577 BENEFITS OF REGISTERING YOUR PRODUCT: customerservice@elementelectronics.com Support Get assistance quickly by pre-registering your product. 18 EE20_0082d_ESBAB21RTR_User_Guide.
Bring it home. TM EE20_0082d_ESBAB21RTR_User_Guide.