VGA Splitter ELE1X2SPV350 1x2 VGA Splitter 350 MHz INSTALLATION MANUAL
INTRODUCTION Dear customer, Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference. This product is a 1x2 VGA splitter with audio. It distributes the input of the VGA signal and stereo audio signal into the two identical outputs simultaneously. This product has the ability of buffering and amplifying.
SPECIFICATIONS Specifications Input connectors: 1 VGA 15 pin female Output connectors: 2 VGA 15 pin female Bandwidtch (-3db): 350MHz Output independence/Level: RGB: 750 0.7Vp-p HV SYNC TTL Level Resolution: 1920x1440, Support DDC, DDC2, DDC2B (at PNP port) Horizontal frequency: 30-180 KHz Vertical frequency: 43-250 Hz Transfer distance: <50 meters Power consumption: Use AC-DC Adaptor DC 9-12V Consumption <0.9W Dimensions(LxWxH): 4.3” x 2.2” x .
INSTALLATION Connection and Operation Use a quality VGA cable to avoid the signal interference. The RGB grounded wire can not be short circuited otherwise there will be vision superposition. Make sure the cable and plugs are in good shape. Make sure the grounded wires and all the connections are working properly. Make sure there is no disturbing source around.