Instructions for use Thank you for purchasing the Musical Fidelity Nu-Vista 800 integrated amplifier. The Nu-Vista 800 uses our tried and tested ultra-low distortion power amplifier circuitry, which has enough current reserve to drive even the most demanding speakers with ease. The low noise and distortion, high-quality Nu-Vista preamplifier uses valve* circuits used in our original Nu-Vista products, redesigned, to fulfil our latest practices and expectations.
* UK English “valve” mentioned hereafter, refers to the ‘electron valve’ kind, also known as electron “tube” in other parts of the world.
CONTENTS Section Page Safety Information – Mains plug (UK only), modification warning 4 General advice – Installation precautions 5 Installation – Introduction, cleaning, installation, power connections, audio connections 6 Facilities and connections – Illustrations, main unit front & rear panels 7 Remote control handset – Operation and illustration 8 Operation – Starting 9 – Volume – Mute – CD – AUX1/HT – AUX2 – TUNER – Balanced – Illuminations – Wiring 11 Probl
SAFETY INFORMATION IMPORTANT! (U.K. only) This unit is supplied in the U.K. with mains lead fitted with a moulded 13 amp plug. If, for any reason, it is necessary to remove the plug, please remove the fuse holder and dispose of the plug safely, out of reach of children. It must not be plugged into a mains outlet. The wires in the mains lead supplied with this appliance are coloured in accordance with the following code: Green and yellow ............................. Earth Blue.............................
GENERAL ADVICE Installation, Precautions & User Information This new Nu-Vista 800 is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions: • Heed all warnings shown on the back of the product. • Only connect the Nu-Vista 800 to a mains outlet having the same voltage as marked at the back of the unit. • Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.
INSTALLATION Introduction Congratulations on the purchase of the new Nu-Vista 800 integrated amplifier. Great attention has been paid to internal layout, isolating each circuit section to prevent possible interaction. The unit features a finely tuned and tweaked Nu-Vista valve preamplifier, for smooth sound coupled with low noise and virtually no distortion. The power amplifier consists of two top quality power amplifiers for the absolute best in separation and imaging.
FACILITIES & CONNECTIONS 1 1 2 3 2 4 SOURCE selector DISPLAY VOLUME control 7 3 5 4 5 6 8 10 11 7 LOUDSPEAKER OUTPUTS right 8 HT/AUX function selector for AUX1/HT input 12 6 ON/STANDBY Button IR RECEIVER window DISPLAY AND LED functions button 9 13 14 11 CD, AUX1/HT, AUX2, TUNER line input RCA sockets 12 LINE OUT (fixed) output RCA sockets 9 LOUDSPEAKER OUTPUTS left 13 PRE OUT (volume controlled) output RCA sockets 10 XLR BALANCED inputs left and right 14 IEC MAINS INPUT XLR Balanced in
REMOTE CONTROL The universal remote control shown below enables functions from this and related units to be operated from a convenient distance. Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are only available by remote control. As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the receiver window at the front of the player, without visual obstruction between them.
OPERATION Starting Once all connections are made, switch on the unit, using the POWER button front of the unit. The display will light up and base LEDs (under front panel) will show RED. This means the speaker outputs are muted, and will remain in this state for about 12 seconds, so no sound will be heard from the speakers. Once the delay is up, the base LEDs go green, indicating unit is ready for use, and any source material selected and playing will be heard through the speakers.
OPERATION BALANCED . 60.0 BALANCED To use the BALANCED input, connect source balanced outputs to the BALANCED input sockets (see page 7). Select BALANCED input by rotating the source select control so BALANCED is displayed. Pressing the corresponding button on the remote handset has the same effect (see page 8). ILLUMINATIONS When used in darker environments, for example listening or home theatre rooms. It is possible to switch off selected features to minimise distraction.
WIRING Simple speaker lead wiring Bass/treble terminal links in Bass/treble terminal links in (source and mains leads omitted for clarity) Speaker lead bi-wiring Bass/treble terminal links removed (source and mains leads omitted for clarity) Bass/treble terminal links removed Speaker bi-amping (requires additional power amplifier) Bass/treble terminal links removed (source and mains leads omitted for clarity) Bass/treble terminal links removed P a g e 11
PROBLEMS? Basic problem-solving with an amplifier is similar to troubleshooting other electrical or electronic equipment. Always check the most obvious possible causes first, such as the following examples: Problem Probable Cause Remedy No power when POWER button is pressed. Mains power plug is not fully inserted into rear socket. Plug in securely. No sound Mute function is still active.
SPECIFICATIONS Output Power Voltage Current Damping factor Output devices 330 Watts per channel into 8 Ohms 52 Volts RMS, 20Hz to 20 kHz; onset of clipping 147 Volts peak to peak 120 Amps peak to peak 200 5 pairs per channel Line input THD+N Signal / noise ratio Input impedance Frequency response < 0.005 % typical, 20Hz to 20 kHz > 107dB ‘A’-weighted 40 k Ohms + 0, –0.
MANUAL HISTORY DISPOSAL INFORMATION RELEASE Nu-Vista 800 Integrated DATE th 16 July 2014 CHANGES 1st issue DISPOSAL The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the product from other waste to ensure that it can be recycled in an environmentally safe manner.