Instructions / Assembly

ManualsBrandseLEDing ManualsLighting & Ceiling FansSelf-Contained 160 Degree Black Motion Activated Outdoor Integrated LED Solar Security Flood Light with Dusk-to-Dawn

Thank you for choosing eLEDing!

It is important that you read this set-up instruction before installing

Any questions or issues, please contact us before returning

Our goal is 100% customer satisfaction

Please post your positive feedback on the web-stores

We appreciate your business! Thanks again!

EESGI: info@eesgi.com 1-877-579-3889 USA or 626-579-3889 (M-F, 10:00am to 5:00pm PST)

(Refer Page 2 for detail of Installation)

INSTANT DISCOUNT COUPON for Purchasing any of these High Performance Solar Lights

EE805W56

(WP)

(BP)

Contact Info: (877)579-3889, sales@eesgi.com, www.eleding.com

EE818WDC

Equivalent to 100W+ Halogen Lamp or

200 pieces traditional LED matrix illuminators

Dusk to Dawn continuous illumination

EE860plus

Equivalent to 60W+ Standard Lamp

Upgraded dual operating SMART modes

Dusk to Dawn continuous illumination

EE814WDC

Equivalent to 60W+ Halogen Lamp or

100+ pieces traditional LED matrix illuminators

Dusk to Dawn continuous illumination

Rev. EE805W56 092015 Page 1

Summary of content (3 pages)

PAGE 1
Thank you for choosing eLEDing! It is important that you read this set-up instruction before installing Any questions or issues, please contact us before returning Our goal is 100% customer satisfaction Please post your positive feedback on the web-stores We appreciate your business! Thanks again! EESGI: info@eesgi.
PAGE 2
eLEDing EE805W56 Quick Set-up Reference First-Time Activate/Turn on the Light The unit comes with an activation needle to activate the light. Insert the needle or small paperclip into the small hole at the top edge of the light body to activate and turn on the light (Refer Fig 1). If this process is launched in daylight condition the unit will shut off automatically within a few seconds and then will turn on only in darkness.
PAGE 3
eLEDing EE802WDC & / 使用附带小针戳入灯体中间小孔激活该产品（见图1）。黄昏时该灯将自动点亮；黎明时该灯会自动熄灭，直至黄昏重新点亮。初次使用时，建议在夜晚或黑暗环境下激活/ 启动该产品。如在白天，请务必将嵌有太阳能板的一面朝下置于光滑桌面上，或用软布将此面盖上。确保灯体安装在没有遮挡物、并能保证每天平均至少四小时太阳直射的位置。灯体的安装需坚固、稳定，例如可安装在墙面、门楣、阳台下方或屋檐下，以保证该灯能够在各类天气环境下稳定工作。若该产品使用于北半球地区，朝南安置为最佳，东、西朝向亦可。南半球（例如澳大利亚、南非和南美）则相反，朝北安装为最佳，东、西朝向亦可。确认照明功能正常后即可开始安装。在嵌有太阳能板的一面上印有刻度，以此刻度之间的距离为标准，在安装面内插入螺丝（见图2）。螺丝安装好后，将嵌有太阳能板的一面朝上，LED一面朝下，将灯体背面小孔对准螺丝头后摁入并向左侧水平移动完成安装。木质、塑料、金属表面：依照标记，使用随盒附带的螺丝直接固定底板。水泥、砖头、浆面墙体：使用直径五毫米的水泥钻头在安装面钻孔并塞入膨胀管，放置好底板，将螺丝插入膨胀管拧紧固定。