Maintenance Guide

Safety Information Page 1 / 2
CAUTION
This product is restricted for occupational use and is not intended or authorised for use by the general
population.
It is the responsibility of the person operating the product to ensure that it is operated safely at all
times, and that local laws and regulations governing the usage of Radio Frequency (RF) products are
observed. Users must be trained to operate this product safely. Their personal safety could be affected
if they do not understand how to operate this product correctly.
Radio Frequency informations
This product must be restricted to operations in an Occupational/Controlled RF exposure
Environments.
Users should be informed of the potential health risks associated with long term exposure to RF
energy by their employer.
Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals
are transmitted. RF technology is widely used in communication, medicine, food processing and other
fields. It may generate radiation during use.
In order to ensure user health, experts from relevant industries including science, engineering,
medicine and health work with international organizations to develop standards for safe exposure to
RF radiation.
Any transmission from this unit must be with a frequency allocated by local regulator. A carefull check
must be provided before connecting an antenna to the unit.
Servicing and accessories
Only accessories approved by Etelm are recommended for use with this product. Always read the
instructions supplied with the accessory for additional safety instructions. Unauthorised modifications
to the product could cause the product to become non-operational and void any product warranty. The
use of non-approved accessories may invalidate any product warranty and may compromise the
product safety ratings
Do not attempt to dismantle this product. Servicing and repairs of the product must be done by trained
service technicians at Etelm.
FCC Regulations
Federal Communication Commission (FCC) requires that all radio communication products should
meet the requirements set forth in the above standards before they can be marketed in the U.S, and
the manufacturer shall post a RF label on the product to inform users of operational instructions, so as
to enhance their occupational health against exposure to RF energy
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for a controlled environment. The
antenna should be installed and operated with minimum distance 1.0m from human body. This
transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.