INSTRUCTION MANUAL Locations Of Control Main Unit Altaic El HR/MONTH BUTTON MIN/DATE BUTTON [B] 12i24/YEAR BUTTON LOCK/TIME SET CALENDAR SWITCH RESET BUTTON RE-SYNC BUTTON “CIF SWITCH Hl BATTERY DOOR STAND SUPPORT Remote Unit Reset Battery Door Wall Mount Holder = Feature IN temperature and REMOTE temperature Centigrade or Fahrenheit readout Hour and minute display 12 or 24 hour format Calendar with day of week display from January 1, 2000 to December 31, 2030
Maximum and Minimum Temperature record Battery life : approximate 1 year ( with alkaline battery ) Operating temperature from 0C to 40C (32F to 104F) Temperature measuring range from -50C to 70C (-58F to 138F) Temperature resolution 0.1C ‘Weather Forecast Before You Begin To ensure proper functioning of the RF Thermos Clock, please follow this set up procedure. ® Insert batteries for main unit ( Refer to instructions for battery installation ).
also once batteries are placed in the remote unit, it will start to transmit information t 3 minutes intervals. Upon successful reception, the remote unit temperature will be displayed on the Remote temperature field. The main unit will automatically update the remote reading at 3 minutes intervals. «ow If no signals arc received within the 10 minutes intervals, bla will be displayed.
Clock Set At the back of the RF Thermos Clock, slide the switch to TIME SET and the time will keep flashing on the display. Then press HR or MIN button to set your desired time and slide the switch to the LOCK position to complete the time set. Calendar Set At the back of the RF Thermos Clock, slide the switch to CALENDAR and the date will keep flashing on the display.
Lose Sync. If without obvious reasons the display goes blank, press RE-SYNC to force the receiver to start receive signal. If it still fails, check: ® The remote unit is still in place. © The batteries of both remote unit and main unit, replace as necessary. ® The transmission is within range and path is clear of obstacles and interference. Shorten the distance when necessary.
The remote unit comes with a wall mount holder which can hold the unit on wall, or just place it on a flat surface. Reset the RF Thermos Clock Press the RESET button when the RF Thermos Clock does not operate normally. Note: Once resetting the RF Thermos Clock, the main unit will start to receive for 10 minutes { Refer to Getting Started ). Take care of your RF Thermos Clock ® Avoid exposing your RF Thermos Clock to extreme temperatures, water or severe shock.
Main Unit : Display temperature range © -50.0C to 70.0C to 158.0F) Proposed operating range : 0.0Ct040.0C (32.0F to 104.0F) Temperature resolution oo 01C Power t PCs AA 1.5 V alkaline battery ‘Weight Dimension Remote Unit : Display temperature range: -50.0C to 70.0C to 158.0F) Proposed operating range : oo -20.0C to 60.0C to 140.0F) Temperature resolution 0 01C Power © PCs AA 1.
® Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ® Consult the dealer or an experienced radio/TV technician for help. Under the environment with radio frequency interference, the sample may malfunction and require user to reset the sample.