INSTRUCTION MANUAL MODEL 7966 +6720 Locations of Control Main Unit Co 3 RE-SYNC BUTTON TEMP/MAX/MIN BUTTON CLEAR BUTTON 3 crouton I SHYLOCKIAN SET/TIME SET CALENDAR SWITCH TRIMONTHLY BUTTON BI #NOTATE BUTTON MN 2024) YEAR BUTTON RESET BUTTON Is BATTERY DOOR \ SNOOZE MIGHT BUTTON a Ba [A SNCOZEIALM COLONIAL OFF SWITCH Remote Unit en SO 0 Fordable Stand Temperature | mf | Battery Door = Reset {a L288 .
Feature «IN temperature and REMOTE temperature » Centigrade or Fahrenheit readout * Hour and minute display hour format + Calendar from July 1, 1997 to December 31, 2039 + Maximum and Minimum Temperature record + Battery life : approximate 1 year ( with alkaline battery ) + Operating temperature from 0°C to 40°C (32°F to 104°F) + Temperature measuring range from ~50°C to 70°C (-58°F to 138°F) « Temperature resolution 0.
Getting Started Once batteries arc placed in the main unit, it will start receive signal for 3 minutes, also once batteries are placed in the remote unit, it will start to transmit information at 3 minutes intervals. Upon successful reception, the remote unit temperature will be displayed on the Remote temperature field. The main unit will automatically update the remote reading at 3 minutes intervals. If no signals are received within the 5 minutes intervals, blank “= will be displayed.
At the back of the RF Thermos Clock, slide the switch to ALM SET and the alarm time will keep flashing on the display. Then press HR or MIN button to set your desired alarm time. To slide to ALM ON position, the sign will appear on the display, the alarm function is activated. To slide to SNOOZE position to active the Snooze Alarm, the Zz sign will appear on the display to indicate the activation of the SNOOZE function.
Lose Synge. If without obvious reasons the display goes blank, press RE-SYNC to force the receiver to start receive signal. If it still fails, check: * The remote unit is still in place. * The batteries of both remote unit and main unit, replace as necessary. + The transmission is within range and path is clear of obstacles and interference. Shorten the distance when necessary.
Reset the RF Thermos Clock Press the RESET button when the RF Thermos Clock does not operate normally. Note: Once resetting the RF Thermos Clock, the main unit will start to receive for § minutes ( Refer to Getting Started ). Take care of your RF Thermos Clock « Avoid exposing your RF Thermos Clock to extreme temperatures, water or severe shock. « Do not put your RF Thermos Clock in conditions of excessive force, shock, dust, extreme temperature or humidity.
Display temperature range Proposed operating range Temperature resolution Power Weight Dimension Remote Unit : Display temperature range Proposed operating range Temperature resolution Power Weight Dimension -50.0°C to 70.0°C to 0.0°C to 40.0°C (32.0°F to 01°C 2 pes AAA 1.5V battery 190g 10.2% 15.7 x 2.7mm -50.0°C to 70.0°C to -10.0°C to 60.0°C to 0.1°C 2 pes AA 1.5V battery 136g 13% 7.5 x 5.
+ Consult the dealer or an experienced radio/TV technician for help. Under the environment with radio frequency interference, the malfunction and require user to reset the sample.