Size: 140mm{W} x 177mm{H) pages M025 P1 INSTRUCTION MANUAL LOCATION OF CONTROLS: Clock {Main unit} LCD MONTH HOUR DATE MINUTE Bl YEARAM2/24HR LOCK/TIME SET/CALENDAR “GFF RE-SYNC RESET Model 185¢ Wireless Transmitter (Outdoor sensor} LCD “CPF Reset Battery Folder able Stand Wall Mount Holder SEE Model 5724 + The Configuration of your clack may Gar Sosa from that show in tha aspiration.
P3 M025 PA Getting Started Once batteries are placed in the main unit, it will start receive signal for 5 minutes also once batteries are placed in the outdoor unit, it will start to transmit signal at 3 minutes intervals. Upon successful reception, the outdoor unit temperature will be displayed on the Remote temperature field. The main unit will automatically update the outdoor reading at 3 minutes intervals. If no signal is received within the first 5 minutes intervals, blank" will be displayed.
Ps Pg Wall Mounting or Using the Stand The main unit has a built in stand you can flip open fo support the main unit on a flat surface. You can close the flip and mount the unit on a wall. Drive a screw into the wall until the head extends about 1/8 inch from the wall, then locate the keyhole slot over the screw head and slide the Walt down to make it secure. 1. Pub down Fp over stand 2 Pauli up the Raiding stand 3. inset send ino the leaseback 4.
P7 Pg Outdoor Unit; Display temperature range © -50°C to 70°C (-58°F to 158°F) Proposed operating range © 20°C 10 80°C (-4°F to 140°F) Temperature resolution Otc Power © PCs UM-3 or "AA" size batteries Dimension (LxWxH) © 100 x 30 x 70mm Warning: Changes or modifications to this unit not expressly approved by the partly responsible for compliance could void the user's authority to operate the equipment.