Dear users, First of all, thank you for giving us the opportunity to serve you! Before using this product, please read the instructions carefully. This "manual" is intended to introduce you the basic characteristics of this product, in order to help you using it at the best way. This manual describes the product's features and information in details, as well as recommendations and attentions to help you fully understand the technical characteristics of the product.
FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Content Prompt ................................................................................................................................3 Technical parameters ........................................................................................................4 Appearance Preview..........................................................................................................5 1. Appearance Introduction .......................................................................................
Prompt ... Do not disassemble the product; do not use alcohol, thinner or benzene to clean the surface of the product, if there is any problem, please contact us. ... The product should be charged more than 12 hours in the first three times. ... Do not put the product in a place with high temperature, humidity or dust; do not put the product in a vehicle with windows closed especially in summer. ...
Technical parameters Machine CPU 800MHZ DSP Operating system Android 2.3 Browser Google Browser Hard disk 2GB Memory 256MB DDR2, up to 1G Expansion slot TF card Screen 7.0 inches TFT Resistive Touch Panel Resolution 800x600 Input method Soft-keyboard on touch panel Built-in speakers 0.8W speakers Earphone 12PIN 3.5mm USB USB 2.0 Battery Rechargeable lithium battery 2500mAh Size 197.5mm×142mm×8.5mm Weight 0.
Appearance Preview 1. Appearance Introduction This chapter describes the appearance of the machine, including buttons and ports; it will guide you to understand the features and accessories. 1.
Appearance Preview Note: (1) The LCD is a touch screen; you can carry out clicking and dragging operations in the touch area; please do not use pen, pencil or other sharp objects to click on the screen to avoid scratching. (2) Please keep the speakers clean to avoid the dirt blocking the hole and affect the sound. 2. TF card When plug a TF card, please do follow the icon on the machine, pay attention to the direction of oblique angle.
First experience The MID can achieve a variety of operating modes: (1) Clicking. (2) Holding. (3) Sliding. (4) Dragging. (5) Rotating. Keys action definition: (1) Short press: the time is less than 1.2 seconds. (2) Long press: the time is longer than 3 seconds. There are all short presses in this manual without special instructions. 360 degree rotation: for most interfaces or images, it can automatically rotate the screen from horizontal into vertical as long as rotate the MID. 1. Boot the MID 1.
First experience Click the "Power off" button, another interface will pop-up (upper right), after clicking "Confirm", the MID will enter the shutting down status, in a few seconds the machine will shutdown. **** When battery is running low, the system will automatically shut down. 3. Lock-screen and power-saving mode When the machine is on, press the power switch or the screen is inactivity a certain time, the MID will enter into screen-off / lock-screen status for power saving.
First experience (1) Shortcut icons (2) Status bar (3) (4) (5) Time display (6) (8) (9) (7) Battery indicator Browser Applications WIFI network icon Volume + / Set Descriptions: When connect the machine to a network through WIFI, if the connection is successful, the " Network icon" will be displayed. 5. Operating experience 1. At the main interface, sliding the middle of the screen left and right can realize switching of different main interfaces; the machine has three main interfaces.
First experience 3,Click " Applications function", MID will pull out "application function keys interface." Through sliding the screen upward and downward, you can browse shortcut icons of all applications. Click the button, "application function key interface" will be hidden. 4. Load of shortcut icons on the main interface. For ease of use, users can freely add or delete the shortcut icon of commonly used software on the main interface. Three are two ways to add shortcut icons: A.
First experience Press the icon in sub-menu, it will be added to the main interface. 1-2 Click "Widgets" or "Folders" to enter the next menu Press the icon in sub-menu, it will be added to the main interface. 5.Interchange of wallpapers on the main interface In order to decorate personalized main interface, users can set their favorite pictures, photos ... as wallpaper of the main interface. 1-1 Click in "Menu window", MID will pop-up corresponding menu.
First experience 1-2 Click "Wallpapers" to enter its sub menu (top right), or click in "Menu window" directly. 1-3 For example: Click "Wallpaper Gallery" to enter the next menu (see below). Slide the screen, browse and select the appropriate picture, after clicking , MID will return to the main interface and display the selected wallpaper. *** When sub-interface is displaying, click "Return" to close the interface and return to the previous menu.
First experience 6. Connection of USB cable. When connect the MID to computer with a USB cable, will show the following interface. Click , After connection, it can realize synchronized operation between MID and computer. At this time, files in TF card and memory of MID will be displayed on the computer; you can copy and transfer the data. 7. Reset When the MID is halted or display difficult, you can quickly restart the machine through reset.
Internet Function 1. Network connection The MID achieves internet access through built-in WI-FI modules. 1-1.Click , MID will pop-up settings menu. 1-2 Click "Wireless & Networks" to enter the next interface (See top right) (1) Flight mode. Click to open / close all network connections. (2)WIFI (2-1) Click "WIFI" to open this network. (2-2) Click "WIFI settings" to enter setting interface, see below.
Internet Function 2. Internet 2-1 Click "Google Search" icons in the main interface or window", keyboard menu will pop-up button in "menu Note: If there is no "Google Search" icon in the main interface, users can load it according to the method described previously. 2-2 Input the URL to open the webpage. Directly press "Menu” on the front of the machine to pop-up “Menu window" to set more functions.
Software Management The product supports third-party applications on android platform, most applications can be obtained and downloaded from the Internet. 1. Explorer Click in "Applications function key menu" to enter into explorer, you can browse, copy, delete, move, rename, and other editing operations to the files in the machine and TF card. 2. Software installation Click the software to be installed in the "Explorer", MID will open the installer interface.
Applications 1. Music Playing 1-1 Click in the "Applications function key menu" to enter into the playlist. 1-2. Click music files to play it in the player, see top right. 2. E-mail Click in "Applications function key menu" to enter into E-mail settings, input the email address and password, you can send and receive email messages.
Applications 3. Web browser Click in "Applications function key menu" to enter into Web browser. Under this state, click "menu key" to pop-up corresponding setting menu. 4. Picture browsing Click In "Applications function key menu" to enter into picture browsing interface. Users can browse pictures and data stored in TF card.