Dear users: First of all, thank you for giving us the opportunity to serve you! Before using this product, please read the instructions carefully. This "manual" is intended to introduce you the basic characteristics of this product, in order to help you using it at the best way. This manual describes the product's features and information in details, as well as recommendations and attentions to help you fully understand the technical characteristics of the product.
Content Technical parameters .............................................................................4 Appearance Preview ..............................................................................5 1. Appearance Introduction ...................................................................5 2. TF card .................................................................................................6 3. Charge .........................................................................................
Prompt ... Do not disassemble the product; do not use alcohol, thinner or benzene to clean the surface of the product, if there is any problem, please contact us. ... The product should be charged more than 12 hours in the first three times. ... Do not put the product in a place with high temperature, humidity or dust; do not put the product in a vehicle with windows closed especially in summer. ...
Technical parameters Machine CPU Intel Clover Trail+ Z2520 1.2GHz Operating system Android 4.2.2 Browser Google Browser Hard disk 8GB NAND Flash Memory 1GB DDR3 Expansion slot MicroSD Card Slot, Support up to 32GB flash Screen 7” TFT Touch Panel Camera Front 0.3 +Rear 2.0 megapixels Resolution 1024x600 Pixels Input method Soft-keyboard on touch panel Built-in speakers 1W 8ohm built-in speaker Earphone 3.5mm USB cable Micro USB Battery Li-polymer Rechargeable Battery 3000mAh 3.
Appearance Preview 1. Appearance Introduction This chapter describes the appearance of the machine, including buttons and ports; it will guide you to understand the features and accessories.
Appearance Preview Note: (1) The LCD is a touch screen; you can carry out clicking and dragging operations in the touch area; please do not use pen, pencil or other sharp objects to click on the screen to avoid scratching. (2) Please keep the speakers clean to avoid the dirt blocking the hole and affect the sound. (3) The back of the MID has antenna and model, please do not cover with metal objects to avoid weak signal. 2.
First experience The MID can achieve a variety of operating modes: (1) Clicking. (2) Holding. (3) Sliding. (4) Dragging. (5) Rotating. Keys action definition: (1) Short press: the time is less than 1.2 seconds. (2) Long press: the time is longer than 3 seconds. There are all short presses in this manual without special instructions. 360 degree rotation: for most interfaces or images, it can automatically rotate the screen from horizontal into vertical as long as rotate the MID. 1. Boot the MID 1-1.
First experience Click the "Power off" into the following screen. Click the "OK" options, the MID will enter the shutting down status, in a few seconds the machine will shutdown. * * * When electricity to 15%, the system will prompt charge. When battery is running low, the system will automatically shut down. 3.
First experience 4. Main interface description (4) (2) (1) (3) (1) Click to enter into the applications menu. (2) Shortcut icon add/delete will be covered later. (3) Widgets add/delete will be covered later. In pop-up menu, press it to cancel operation. In the other menu, press it to back the front menu. In any menu, press it to back the main interface. Click to display all APPS programs that have been opened. Click each of the application to enter into its relevant menu.
First experience In the main interface, the system sets 5 display menus. You can browse them freely through sliding screen from left and right. **You can add/delete different icons in each the main menu. 5. Custom Screen 5-1 Add shortcut 5-1-1 In the main interface, click button to open Application Program menu. 5-1-2 Press and hold the icon,will open the add shortcut interface. 5-1-3 Move the icon to the place you want to place, the program will add shortcut to the main interface.
First experience *** In the main interface, users can click and drag any shortcut icon and Widgets to the place to achieve personalized arrangement. 6. Change your wallpaper In order to decorate personalized main interface, users can set their favorite pictures, photos ... as wallpaper of the main interface. 6-1 Press and holding touch screen in the main interface, the machine will pop-up the wall paper dialog box.
First experience selected wallpaper. 7. Connection of USB cable. When connect the MID to computer with a USB cable, icon will be displayed in the information column of the main interface. 7-1 Click following 7-2 Click in the information column of the main interface, the machine will open the interface. , it can realize synchronized operation between MID and computer. 7-3 At this time, files in TF card and memory of MID will be displayed on the computer; you can copy and transfer the data.
System setting In the setting interface, user can complete many custom settings and inspect the relevant information of all the software that being installed. Click in the Application Program menu to enter into its setting menu. APPS 2-1 In the apps settings interface, user can see all installation applications. 2-2 If you open one application, you can browse its relevant information. 2-3 As to not be used application again, you can select to delete one application.
Internet Function 1. WI-FI The MID achieves internet access through built-in WI-FI. Click , MID will pop-up settings menu. 1-1 Sliding the “Wi-Fi” switch button to open the Wi-Fi. 1-2 Click “Wi-Fi” to enter into the Wi-Fi setting menu. 1-3 The system will automatically search and add the nearby networks can be connected, and display the name of network. 1-4 Clicking a wireless network, MID will pop-up messages menu. After entering the password, click .
Internet Function searching the Wi-Fi router automatically and then connect to it . When the network icon will be displayed in main interface, the machine has connected WIFI successfully. 2. Internet 2-1 Under the normal statue of the network connection, Click in the main interface to enter into its menu. There will display all the Web of having been opened. 2-2 Click the input frame, keyboard menu will pop-up, input a new Web site and open.
Software Management The product supports third-party applications on android platform, most applications can be obtained and downloaded from the Internet. 1.Explorer Click in Application Program Interface to enter into explorer, you can browse, copy, delete, move, rename, and other editing operations to the files in the machine and TF card. 2. Software installation 2-1 Click the software to be installed in the "Explorer", MID will open the installer interface.
Applications 1. Music Playing 1-1 Click in the “Application Program Interface” to enter into the playlist. 1-2 Click a music file to open the player and play it. Playmode Random Playlist Specialcover Artist Specialname Playtime Songname Schedule next Totaltime previous Play/Pause 1-3 Backstage play When have playing a music, click to back the main interface,the machine will enter into a backstage play mode. Click in the main interface to display its menu.
Applications 2. Picture browsing 2-1 Click in ” Application Program Interface” to enter into picture browsing interface. there are all the picture and video data stored in the machine and a TF card. 2-2 Select a picture to browse. \ 2-3 Select a video data to play.
Applications 3. E-mail Click in ” Application Program Interface" to enter into E-mail settings, input the email address and password, you can send and receive email messages. 4. Camera and video recording Click in” Application Program Interface"to enter into its interface.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types MID / MDT7A9-WBR (FCC ID: ZL9-M71DP3) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the properly worn on the body is 0.1288W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0cm from the body.