In-Wall ® Audio Receiver ENG INSTALLATION MANUAL
In-Wall Bluetooth® Audio Receiver Installation Manual ENG 1. Installation (1) Power Supply Unit (15Vdc, 0,53A) Front View 230Vac/15Vdc 0,53A Back View (2) 4, 8 or 16 ohm Speakers (any brand of speaker permitted) 0521 (3) Bluetooth Audio Receiver (The Module) L- 52691 Front View Front View 1,5W/8ohm 2,5w/4ohm Back View View Back R+ R- KINGBT-XXXX BLUETOOTH AUDIO RECEIVER MOD. 15Vdc V+ GND Top View Top View 0521 0521 L+ L- R+ R- KINGBT-XXXX BLUETOOTH AUDIO RECEIVER MOD.
In-Wall Bluetooth® Audio Receiver Installation Manual ENG 2. Electrical and functional specification Power: the Module is powered from an external power supply unit. Any 15Vdc power supply unit may be used. Bluetooth ID Audio output: the Module provides a stereo audio output consisting in left and right channels.
In-Wall Bluetooth® Audio Receiver Installation Manual Connect 3.2. Once the blue led flashes you are ready to pair. The Module remains in pairing mode for one minute. If the Bluetooth device is not connected during this time, the Module will automatically turn off and you must repeat the process again. Connected Bluetooth To pair, go to the Bluetooth settings in your Bluetooth device (Smartphone, tablet, PC, etc.) and follow the respective search procedures.
In-Wall Bluetooth® Audio Receiver Installation Manual ENG FCC Compliance Statement 1. FCC ID: 2AB6X52691. The information about the Bluetooth audio receiver is on file with the FCC and can be found under the display grant section of http://www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AB6X52691 2. This device complies with Part 15 of the FCC Rules.