User's Manual

ManualsBrandsElectronic Warfare Associates ManualsElectronicsRemote Control Electronic Door Lock FOB

REMOTE CONTROL ELECTRONIC DEADBOLT

www.SimpliciKey.com

1 (800) 785-6595

Keep this code safe

Place Label Here

Default Admin Code

(See www.simplicikey.com for more details.)

Lifetime limited finish and mechanical warranty

2-year electronic warranty

Garantía limitada de por vida para el acabado y el

sistema mecánica

Garantía de 2 años para el sistema electrónico

Summary of content (6 pages)

PAGE 1
REMOTE CONTROL ELECTRONIC DEADBOLT www.SimpliciKey.com 1 (800) 785-6595 Keep this code safe Default Admin Code Place Label Here Lifetime limited finish and mechanical warranty 2-year electronic warranty Garantía limitada de por vida para el acabado y el sistema mecánica Garantía de 2 años para el sistema electrónico (See www.simplicikey.com for more details.
PAGE 2
Changing Your User Admin Code Parts List First things first—make sure you have all of the necessary components in your SimpliciKey package. 1 interior lock Default Admin Code 2 long wood screws 2 short bolts 1 interior plate Enter your Default Admin Code (see below) or the existing User Admin Code and press the * key to begin Admin mode.
PAGE 3
LOCK INSTALLATION INSTRUCTIONS Keypad Instructions 1. Remove Existing Deadbolt Your administration code (Admin Code) can be found on the back of this booklet. The Admin Code can be changed by following instructions on page 11. Command Press Simple Lock Feature Enables to lock without entering a Key Code. 1. Enter Admin Code 2.
PAGE 4
. Remove Existing Strike Plate Keypad Instructions First, remove the two existing strikeplate screws. Remove the strike plate and any other hardware behind the plate. Install strike box, reinforcement plate, and strike plate, then tighten screws. Your administration code (Admin Code) can be found on the back of this booklet. The Admin Code can be changed by following instructions on page 11. Strike plate Command Press Add Key Code 1. Enter Admin Code Strike wood screw 2.
PAGE 5
Remote Control Keyfob Instructions 6. Install Exterior Lock Your administration code (Admin Code) can be found on the back of this booklet. The Admin Code can be changed by following instructions on page 11. Slide the wires above the deadbolt slide assembly. Command Critical Point Press Insert the flat bar horizontally into the cross-hairs of the deadbolt slide assembly. Add Remote Control Keyfob Enter Admin Code 1. Enter Admin Code A 2. Enter “ADD FOB”, press * 3.
PAGE 6
DAILY USE INSTRUCTIONS 9. Install Interior Lock Guide excess wires into cavity above the green circuit board. Align thumbturn with crank bar to mount to interior plate. Attach interior lock to interior plate with the two short bolts through holes under battery case. Be careful not to pinch the wires as you install the lock. 10. Test the Manual Deadbolt Insert key into cylinder and turn to extend deadbolt to locked position.