User's Manual

ManualsBrandsElectronic Systems Technology ManualsElectronicsESTEEM 195Eg

APPENDIX B

SPECIFICATIONS

Model 195Eg Specifications

Revised: 2 Jul 08 APX B-1 EST P/N AA107G

LED Indicators

Power On/Off Receiver On/Off

Carrier Detect On/Off Transmitter On/Off

Link Status On/Off

I/O Connectors

Ethernet 10/100Base T RJ-45

RS-232C Programming/Data Port RJ-45

Dual Antenna input/Outputs TNC Reverse Female

Remote Input Power Power Over Ethernet Cable

Direct Input Power Optional, Header Screw Connector

Transmiter

Frequency of Operation

2.412 to 2.462 GHz

Software Selectable in 11 Channels

RF Data Rates 1,2,5.5,6,9,11,12,18,24,36,48, & 54 Mbps Fixed or Auto Scaling

Tx Peak Output Power 1 Watt

RF Output Impedance 50 ohms

Receiver

Rx Sensitivity

-68 dBm @54 Mbps to –89 dBm @ 1 Mbps

Frame Error Rate <10%

Power

Power over Ethernet

IEEE 802.3af Standard Power Supply,

48 VDC @ 13 Watts

Power Connector on Unit 10 to 16 VDC

Receive 320 ma @ 12 VDC

Transmit 1000 ma @ 12 VDC

Case

Dimensions 1.9 in. H x 6.7 in. W x 6.2 in. L

Weight 1.25 lbs.

Outdoor Pole Mounting Kit Optional, EST P/N 195PM

Other

Warranty 1 Year

Temperature Range

-30° to +60° C

Humidity 95% Non-condensing

FCC Type Acceptance ENPESTEEM195EG-1

Industry Canada Type Acceptance 1457A-195EG

The GPL source code contained in this product is available as a free download from the following:

ftp://ftp.esteem.com/opensource/gplsourcepackage.tar.bz2

If you would like a copy of the GPL source code contained in this product shipped to you on CD,

please send $9.99 to 415 N. Quay Street, Kennewick, WA 99336 which covers the cost of preparing

and mailing a CD to you.

Specifications Subject to Change Without Notice

Summary of content (9 pages)

PAGE 1
APPENDIX B SPECIFICATIONS Model 195Eg Specifications LED Indicators Power On/Off Carrier Detect On/Off Link Status On/Off Receiver On/Off Transmitter On/Off I/O Connectors Ethernet 10/100Base T RS-232C Programming/Data Port RJ-45 RJ-45 Dual Antenna input/Outputs Remote Input Power Direct Input Power TNC Reverse Female Power Over Ethernet Cable Optional, Header Screw Connector Transmiter Frequency of Operation RF Data Rates 2.412 to 2.462 GHz Software Selectable in 11 Channels 1,2,5.
PAGE 2
APPENDIX B SPECIFICATIONS Model 195Eg Case Specifications Revised: 2 Jul 08 APX B-2 EST P/N AA107G
PAGE 3
APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Antenna Envelope: Weight: AA01S Omni-Directional, variable angle rubber duck Direct mount 2400 to 2485 MHz Vertical Caution 50 ohms Omni-directional antenna Unity should not be located within < 1.5 20 cm of personnel. n/a n/a n/a Rubber duct whip.
PAGE 4
APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Antenna Envelope: Weight: AA20Eg Omni Directional, DC Grounded Fixed base 2400 to 2500 MHz Vertical 50 ohms 6 dBi (4dBd) 1.2:1 Typical n/a n/a 40 degrees @ ½ power Brass radiator, UV inhibited fiberglass enclosed Base to Mast, Supplied.
PAGE 5
APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Maximum Power Input: Antenna Envelope: Windload (RWV): Lateral Thrust at Rated Wind: Wind Surface Area: Weight: Revised: 2 Jul 08 AA203Eg Directional, DC grounded Fixed base. 2400 to 2485 MHz Vertical or Horizontal 50 ohms 6 dBi (4 dBd) < 1.
PAGE 6
APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Applications: Antenna Type: Frequency: Polarization: Impedance: Gain: VSWR: Front to Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Recommended Mounting Hardware: Antenna Connector: Maximum Power Input: Wind Survival: Wind Load: Antenna Envelope: Weight: AA204Eg Fixed base mounting 2.
PAGE 7
APPENDIX B SPECIFICATIONS Antenna Specifications Caution Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front To Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Antenna Envelope: Weight: To comply with the FCC AA20E exposure compliance requirements, a separation Omni Directional, DC Grounded distance of at least 20 cm Fixed base must be maintained between 2400 to 2500 MHz the antenna and all persons Verti
PAGE 8
APPENDIX B SPECIFICATIONS Antenna Specifications Model No: Antenna Type: Applications: Frequency: Polarization: Impedance: Gain: VSWR: Front To Back Ratio: Horizontal Beamwidth: Vertical Beamwidth: Antenna Material: Mounting Hardware: Antenna Connector: Maximum Power Input: Antenna Envelope: Windload (RWV): Lateral Thrust at Rated Wind: Wind Surface Area: Bending Moment at Base Rated Wind: Weight: AA203ES Directional, 6 element yagi, DC grounded Fixed base. 2400 to 2483.
PAGE 9
APPENDIX B SPECIFICATIONS Antenna Specifications Model No: AA204ES Applications: Fixed base mounting Antenna Type: 2.4 GHz ISM, Directional, 16 Element Yagi, DC Grounded Frequency: 2400-2483.5 MHz Caution Polarization: Vertical or Horizontal To comply with the FCC exposure Impedance: 50 ohms compliance requirements, a Gain: 13.5 dBi (11.3 dBd nominal) separation distance of at least 100cm VSWR: < 2.1, 1.5:1 nominal must be maintained between the antenna and all persons.