User's Manual

Forest Z-Wave Remote User Manual

Including a Device Into the Network

1. Select a group into which you wish to include the node using

SELECT

and/or

SELECT

Including a node into the network automatically includes it in the selected group.

2. Press the include/delete button by inserting a paper clip. The green LED will light solid and the

channel LED(s) will turn off.

3. Press

SELECT

. The green LED and the channel LED(s) should turn on solid.

4. Press the Learn button on the device you wish to include into the network within 10

seconds.

5. The Green LED should flash and then turn off, indicating the devices was successfully

included.

Controlling a Group of Devices

1. Select the group you wish to control using

SELECT

and/or

SELECT

. A group may contain

one device or multiple devices, and every device that is a member of the selected group

will be controlled.

2. Press Open, Close, or Stop to control the device(s) in the selected group.

Deleting a Device From the Network

1. Press the include/delete button. The green LED will light solid and the channel LED(s) will turn

off.

2. Press

SELECT

. The red LED on the top right of the remote will light solid.

3. Press the Learn button on the device you wish to delete from the network within 10

seconds.

4. The Green LED should flash and then turn off, indicating the devices was successfully

included.

Including a Device In a Scene

1. A device must be a part of the Z-Wave network before it can be included in a scene. Operate

the device, either manually or using the Open/Stop/Close buttons, to the position it should

move to when the scene is activated. Repeat for each device to be included into the scene.

2. Press and hold the Scene button corresponding to the scene number into which the device is to

be included.

3. Press SELECT to place the remote in Scene Include mode.

4. Press the Learn button on each device being learned, one at a time.

5. Press the Stop button on the remote or wait for the 10-second timeout to exit Scene Include

mode.

PAGE 1
Forest Z-Wave Remote User Manual Including a Device Into the Network 1. Select a group into which you wish to include the node using SELECT and/or SELECT . Including a node into the network automatically includes it in the selected group. 2. Press the include/delete button by inserting a paper clip. The green LED will light solid and the channel LED(s) will turn off. 3. Press SELECT . The green LED and the channel LED(s) should turn on solid. 4.
PAGE 2
Deleting a Device From a Scene 1. Press and hold the Scene button corresponding to the scene number you wish to delete the device from. A device may be included in multiple scenes, and can only be deleted from one scene at a time. 2. Press SELECT to place the remote in Scene delete mode. 3. Press the Learn button on the device to be deleted. Unlike Scene Include mode, the remote will exit Scene Delete mode as soon as the device has been deleted. Resetting to Factory 1. Press the include/delete button.