Electronic Solutions, Inc. T24A-Pdual or R24A-PRF + RTFM Controlling an RP connected to RR24 Operation & Installation Manual September 9, 2002 Specifications: K24A-PRF + RTFM Transmitter Power Supply Voltage 4.
RR24 Installation Guide Connect the R324 Radio Receiver to the RP as shown “Silver Satin” 4 conductor Flat Modular Phone Cabin must NOT “flip” (ie., Black always on left) Electronic Solutions, Inc. Fearsome. RIR24 To More [AP24°s wen, FORGONE OR GFFKE USE 5, To Gives 0 gh spp eet zr roasts of fr Comedies Np gs BH kb tent The RIR24 unit must connect to an Eye Jack on a RIP or splinter. If the eye connects to a splutter, then the Main jack next to it must connect to the Eye Jack on an RP.
you press and release the learn button and the LED does not come on, the list is “full” and no more transmitters can be learned. Note that in the learn mode (button is pressed or the LED is an), the receiver is not passing commands fo the RP system. Once the transmitter is leaned, and if the STOP bunion is still held, the stop command will be sent to the system.