User Manual

6.4 Heat-up indicator
When the oven function operates, the
bars in the display
appear one by one
when the temperature in the oven
increases, and disappear when it
decreases.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func‐
tion
Application
TIME OF
DAY
To show or change the
time of day. You can
change the time of day
only when the oven is
off.
DURATION
To set how long the
oven works. Use only
when a heating function
is set.
END
To set when the oven
turns off. Use only when
a heating function is set.
TIME DELAY
Combination of DURA‐
TION and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has
no effect on the opera‐
tion of the oven. You
can set the MINUTE
MINDER at any time, al‐
so if the oven is off.
00:00
COUNT UP
TIMER
If you do not set any
other clock function the
COUNT UP TIMER au‐
tomatically monitor how
long the oven works.
It is on immediately
when the oven starts to
heat.
The Count Up Timer
cannot be used with the
functions: DURATION,
END.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
and
"12:00". "12" flashes.
1. Press
or to set the hours.
2. Press
to confirm and set the
minutes.
The display shows
and the set
hour. "00" flashes.
3. Press
or to set the current
minutes.
4. Press
to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
flashes in the display.
7.3 Setting the DURATION
function
1. Set a heating function.
2. Press
again and again until
starts to flash.
3. Press
or to set the minutes
and then the hours. Press
to
confirm.
When the set Duration time ends the
signal sounds for 2 minutes.
and
time setting flash in the display. The
oven turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.4 Setting the END function
1. Set a heating function.
www.electrolux.com10