GK78TSIPO EN Hob User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 7 4. DAILY USE......................................................................................................... 9 5. FLEXIBLE INDUCTION COOKING AREA........
ENGLISH 3 responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • • • • • • • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. Seal the cut surfaces with a sealant to prevent moisture to cause swelling. Protect the bottom of the appliance from steam and moisture. Do not install the appliance adjacent to a door or under a window. This prevents hot cookware falling from the appliance when the door or the window is opened.
www.electrolux.com • • • • • • • • • Do not let the appliance stay unattended during operation. Set the cooking zone to “off” after each use. Do not rely on the pan detector. Do not put cutlery or saucepan lids on the cooking zones. They can become hot. Do not operate the appliance with wet hands or when it has contact with water. Do not use the appliance as a work surface or as a storage surface. If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply.
ENGLISH 7 3. PRODUCT DESCRIPTION 3.1 Cooking surface layout 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 1 3 2 3.2 Control panel layout 1 2 14 3 13 4 5 12 11 10 9 7 6 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sen‐ sor field 1 2 Function Comment PowerSlide To activate and deactivate the function.
www.electrolux.com Sen‐ sor field Function Comment 9 PowerBoost To activate and deactivate the function. 10 - To select the cooking zone. - To increase or decrease the time. ON / OFF To activate and deactivate the hob. - Control bar To set the heat setting for flexible induc‐ tion cooking area. - FlexiBridge mode indica‐ To show which FlexiBridge mode is ac‐ tors tive. / 11 12 13 14 3.3 Heat setting displays Display Description The cooking zone is deactivated.
ENGLISH 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. When the hob is hot and the residual heat indicator is shown, flexibridge and cross lines on the hob surface light up. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 4. DAILY USE WARNING! Refer to Safety chapters.
www.electrolux.com continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch ( comes on). Immediately touch a desired heat setting. After 5 seconds comes on. To deactivate the function: change the heat setting. This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time.
ENGLISH 11 comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you The function has no effect on the operation of the cooking zones. deactivate the hob with operates again. 4.7 STOP+GO This function sets all cooking zones that operate to the lowest heat setting. the function When the function operates, you cannot change the heat setting. 4.10 OffSound Control (Deactivating and activating the sounds) The function does not stop the timer functions.
www.electrolux.com 5. FLEXIBLE INDUCTION COOKING AREA WARNING! Refer to Safety chapters. 5.1 FlexiBridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. The sides of the zones which operate together light up, and they are linked with shorter illuminated lines.
ENGLISH > 160 mm 5.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. The sides of the zones which operate together in this mode light up, and they are linked with shorter illuminated lines. You can set the heat setting for each zone separately. Use two left side control bars. 13 5.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator .
www.electrolux.com Incorrect cookware position: Incorrect cookware position: 5.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator . This mode connects all sections into one cooking zone. To set the heat setting use any of the two control bars on the left side. Correct cookware position: To use this mode you have to place the cookware on the four connected sections.
ENGLISH for the front position, position and 15 for the middle for the rear position. General information: • • 160 mm is the minimum bottom diameter of the cookware for this function. Heat setting display for the left rear control bar shows the position of the cookware on the induction cooking area. Front , middle , rear . You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function.
www.electrolux.com • • some water boils very quickly on a zone set to the highest heat setting. a magnet pulls on to the bottom of the cookware. The printing on the flexible induction cooking area may become dirty or change colour from sliding the cookware. You can clean the area in a standard way. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit.
ENGLISH 17 Heat setting Use to: Time (min) Hints 5-7 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons of liquid. 7-9 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g of potatoes. 7-9 Cook larger quantities of food, stews and soups. 60 150 Up to 3 l of liquid plus ingre‐ dients. 9 - 12 Gentle fry: escalope, veal as nec‐ Turn halfway through. cordon bleu, cutlets, rissoles, essary sausages, liver, roux, eggs, pancakes, doughnuts.
www.electrolux.com 8.1 What to do if... Problem Possible cause Remedy You cannot activate or op‐ erate the hob. The hob is not connected to an electrical supply or it is connected incorrectly. Check if the hob is correct‐ ly connected to the electri‐ cal supply. Refer to the connection diagram. The fuse is blown. Make sure that the fuse is the cause of the malfunc‐ tion. If the fuse is blown again and again, contact a qualified electrician. You do not set the heat setting for 10 seconds.
ENGLISH Problem Possible cause There is no sound when The sounds are deactiva‐ you touch the panel sensor ted. fields. 19 Remedy Activate the sounds. Refer to "Daily use". The flexible induction The cookware is in a Place the cookware in the cooking area does not heat wrong position on the flexi‐ correct position on the flex‐ up the cookware. ble induction cooking area. ible induction cooking area. The position of the cookware depends on the activated function or func‐ tion mode.
www.electrolux.com Problem Possible cause Remedy PowerSlide operates. Two Use only one pot. Refer to pots are placed on the flex‐ "Flexible induction cooking ible induction cooking area". area. and a number come on. There is an error in the hob. Deactivate the hob and ac‐ tivate it again after 30 sec‐ onds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the prob‐ lem continues, speak to an Authorised Service Centre.
ENGLISH 21 contact separation to enable a simultaneous and all-pole cut off from the mains (according to NIN SEV 1000). 400 L1 L2 N L1 PE N PE 9.5 Attaching the seal to the rabbet 5. Fix the glass ceramic on the worktop with silicone. 1. Clean the rabbets in the worktop. 2. Cut the supplied seal stripe into 4 stripes. The stripes must have the same length as the rabbets. 3. Cut the ends of the stripes at an angle of 45°. They should fit in the corners of the rabbets accurately. 4.
www.electrolux.com ON-TOP INSTALLATION R 5mm min. 55mm +1 490+1mm 750 mm 1. min. 2 mm A B < 20 mm min. 500 mm A 12 mm 28 mm 38 mm min 30 mm B 57 mm 41 mm 31 mm 2. min. 38 mm min. 2 mm min. 2 mm A B > 20 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm 3.
ENGLISH min. 12 mm min. 2 mm 23 min. 12 mm min. 2 mm 3. 4. INTEGRATED INSTALLATION 9.8 Protection box R10mm R5mm 8mm 13mm min. 600mm 490+1mm 750+1mm 516+1mm 776+1mm 1. min. 38 mm min. 2 mm 2. If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier.
www.electrolux.com Ser.Nr. ................. ELECTROLUX 7.4 kW 10.2 Cooking zones specification Cooking zone Nominal pow‐ er (maximum heat setting) [W] PowerBoost [W] PowerBoost maximum du‐ ration [min] Cookware di‐ ameter [mm] Middle rear 2300 3200 10 125 - 210 Right front 1800 2800 10 145 - 180 Flexible induc‐ tion cooking area 2300 3200 10 minimum 100 The power of the cooking zones can be different in some small range from the data in the table.
ENGLISH 12. EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance • 11.2 Energy saving • You can save energy during everyday cooking if you follow below hints. • • • CH When you heat up water, use only the amount you need. • 25 If it is possible, always put the lids on the cookware. Before you activate the cooking zone put the cookware on it. Put the smaller cookware on the smaller cooking zones.
www.electrolux.com For Switzerland: Where should you take your old equipment? Anywhere that sells new equipment or hand it in to official SENS collection points or official SENS recycling firms. The list of official SENS collection points can be found at www.erecycling.
ENGLISH 27
867333729-A-432017 www.electrolux.
