user manual Ceramic glass hob GK58TSPLCN
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Installation Description of the appliance Operating the appliance Care and cleaning 2 3 6 7 9 Helpful hints and tips What to do if... Disposal Garantie, Garanzia, Guarantee 10 11 11 12 Subject to change without notice. SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use.
electrolux 3 Warning! If there is a crack on the surface, disconnect power supply to prevent the electric shock. INSTALLATION Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing.
electrolux ELECTRICAL CONNECTION: ASSEMBLY min. 500mm min. 50mm min.
electrolux 5 3 mm 3 mm 25-40 mm 25-40 mm min. 25 mm min. 20 mm TSB min.
electrolux DESCRIPTION OF THE APPLIANCE COOKING SURFACE LAYOUT 1 2 145 120/180 mm 1 2 3 4 5 mm 145 170/210 mm mm 5 3 Single cooking zone 1200 W Double cooking zone 900/1800 W Single cooking zone 1200 W Control panel Double cooking zone 1400/2300 W 4 CONTROL PANEL LAYOUT 1 2 3 4 12 11 5 6 7 10 8 9 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate.
electrolux 7 sensor field function 12 starts and stops the outer ring HEAT SETTING DISPLAYS Display Description The cooking zone is off The cooking zone operates - Keep Warm / function is on The automatic heat-up function is on + digit There is a malfunction / OptiHeat Control (3 step Residual heat indicator): still cooking / keep warm / residual heat / Lock/Child safety function is on The automatic switch off is on OPTIHEAT CONTROL (3 STEP RESIDUAL HEAT INDICATOR) Warning! / / from residual
electrolux THE AUTOMATIC HEAT UP The Automatic heat up function sets the highest heat setting for some time, and then decreases to the necessary level. To start function touch the symbol and than set the necessary heat setting. comes on when the cooking zone operates on the highest heat setting. To stop the function change the heat setting. 12 11 10 9 8 7 6 5 4 3 2 1 0 USING THE TIMER Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session.
electrolux 9 does not stop the timer function. locks the control bars. LOCKING / UNLOCKING THE CONTROL PANEL You can lock the control panel. It prevents an accidental change of the heat setting. First set the heat settings. . The symbol To start this function touch comes on for 4 seconds. The Timer stays on. . The heat To stop this function touch setting that you set before comes on. When you stop the appliance, you also stop this function.
electrolux 2. Clean the appliance with a moist cloth and some detergent. 3. At the end rub the appliance dry with a clean cloth. HELPFUL HINTS AND TIPS COOKWARE • The bottom of the cookware must be as thick and flat as possible. • Cookware made of enamelled steel and with aluminium or copper bottoms can cause discoloration on glass ceramic surface. ENERGY SAVING • If possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it.
electrolux 11 WHAT TO DO IF... Problem Possible cause and remedy You cannot start the appliance or operate it. • Start the appliance again and set the heat setting in 10 seconds. • The child safety device or operates . Stop child safety device or . See the section “Child safety device” or "Stop and go". • You touched 2 or more sensor fields at the same time. Only touch one sensor field. • There is water or fat stains on the control panel.
electrolux PACKAGING MATERIAL Warning! Before disposal, make the used appliance unserviceable. Disconnect the mains plug from the mains socket and remove the mains cable from the appliance. The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal facilities in your municipality.
electrolux 13 ceipt serving as proof). The guarantee covers the costs of materials, labour and travel. The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly instal- led, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components.
electrolux
electrolux 15
www.electrolux.
