Use & Care Guide Warm & Serve Drawer Dishwasher 318 201 017 (0801) Rev.
Finding Information MAKE A RECORD FOR FUTURE USE Brand ______________________________________________________ Purchase Date ___________________________________________________ Model Number __________________________________________________ Serial Number __________________________________________________ NO TE NOTE The serial and model numbers are available on the serial plate located on the right side of the drawer frame. QUESTIONS? For toll-free telephone support in the U.S.
Safety IMPORTANT SAFETY INSTRUCTIONS Please read all safety instructions before using your new Electrolux Warm & Serve Drawer. ! WARNING To reduce the risk of fire, electrical shock, or injury when using your Warm & Serve Drawer, follow basic precaution including the following: • Remove all tape and packaging wrap before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material. • Proper Installation.
Safety ! WARNING Stepping, leaning or sitting on the door or drawer can result in serious injuries and may also cause damage to the warmer drawer. Do not allow children to climb or play around the drawer. An open drawer, when hot, may cause burns. • Storage in or on Appliance—Flammable materials should not be stored in the drawer. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids.
Safety • Placement of Warmer Drawer Racks—Always place rack in desired location while drawer is cool. If rack must be moved while hot, use extreme caution. Use potholders and grasp the rack with both hands to reposition. Do not let potholders contact the hot element or interior of the warmer drawer. Remove all utensils from the rack before removing rack. • Do Not Use Water on Grease Fires—Smother the fire or flame or use dry chemical or foam-type extinguisher.
Setting Control BEFORE SETTING WARMER DRAWER CONTROL Arranging Warmer Drawer Rack Positions Set the warmer drawer rack in the vertical position as shown below. Upright Position Downward Position The rack can be used in 2 ways: • In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish under).
Setting Control 7 SETTING WARMER DRAWER CONTROLS To Set the Controls The digital controls are used to set the temperature of the warmer drawer. It is located at the right side of the warmer drawer in the open position. To Power-Up the Controls On the first power-up or after a power interruption, the unit will flash “88:88°” in the display. Press the ON-OFF pad twice. The display will show “----”, prompting to press another pad. If no other pad is touched, the unit will power off after a few seconds.
Setting Control SETTING HUMIDITY CONTROLLER To Set the Humidity Controller The humidity controller is located on the inside of the warmer drawer and used to control humidity in the warmer drawer. The humidity control knob can be set at any position between Moist (Figure 1) and Crispy (Figure 2) position. To set the humidity controller, slide the humidity control knob to the desired location.
General Care & Cleaning 9 TO REMOVE AND REPLACE WARMER DRAWER ! WARNING Turn the warmer drawer to OFF before removing the drawer. DO NOT touch the warmer drawer element. The element may still be hot enough to cause burns, even if it is dark in color. Lever Pull down lever with finger Left glide To Remove Warmer Drawer: 1. Turn power off before removing the warmer drawer. 2. Open the drawer to the fully opened position. 3.
General Care & Cleaning CARE & CLEANING TABLE Cleaning Various Parts or Your Appliance Before cleaning any part of the drawer, be sure control is turned OFF and the drawer is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER. Surfaces How to Clean Plastic Membrane Keypad Clean with a cloth soaked in soapy water. Rinse with a clean water and a dishcloth. Note: Humidity controller knob can not be removed .
Solutions to Common Problems IMPOR TANT IMPORT Before calling for service, review this list. It may save you both time and expense. This list includes common experiences that are not the result of defective workmanship or material in your Warm & Serve Drawer. DRAWER IS NOT LEVEL • Poor installation. Place a level on the cutout bottom. Make sure bottom is level. • Be sure cutout bottom is strong and stable enough to adequately support drawer (and wall oven, if applicable).
Major Appliance Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
