Information Sheet

Note:

1. This table is compiled according to SJ/T11364-2014.



means: this kind of hazardous substance content in all the homogenous material of this part is within the limitations regulated in

GB/T26572-2011.

means: this kind of hazardous substance content at least in one homogenous material of this part exceeds the limitations

regulated in GB/T26572-2011.

4. For the parts with

in the above table, there is no replacement solution due to technological limitations in the industry; however,

this may change with technological improvement.

5. Under normal usage conditions, the environment-friendly usage period is 15 years.

117890090-A-252016

Hazardous substances

Dishwashers groups

Pb Hg Cd Cr6+ PBBs PBDEs

Cabinet

    

Tub

     

Sump & hydraulics (including pumps, heater & sensors)

    

Softener & inner components

    

Hydraulic circuit

    

Wiring harnesses

    

Door

     

Innerdoor (stainless steel inner door, sealing, bitumen,

detergent dispenser, latch)

    

Control Panel

    

Baskets & sprayarms

     

Fittings: screws, brackets & plastic parts needed for

installation as reported in the assembly instruction

    

PAGE 1
Hazardous substances EN Dishwashers groups Pb Hg Cd Cr6+ PBBs PBDEs Cabinet X      Tub       Sump & hydraulics (including pumps, heater & sensors) X      Softener & inner components X      Hydraulic circuit X      Wiring harnesses X      Door       Innerdoor (stainless steel inner door, sealing, bitumen, detergent dispenser, latch) X      Control Panel X      Baskets & sprayarms    
PAGE 2
有害物质 ZH 部件名称铅汞镉六价铬多溴联苯多溴二苯醚箱体 X      内桶       洗涤动力系统（含集水池，洗涤泵,加热元件和传感器） X      水软化器及内部零件 X      水路管道 X      线束 X      机门       内门（含不锈钢内壁，门封，隔音材料,洗涤剂分配器，门闩） X      控制面板 X      碗筷篮，喷淋臂       安装附件（螺钉，支架,塑料附件） X      说明： 1. 本表格按照SJ/T-11364-2014的规定编制。 2.  表示该有害物质在该部件所有均质材料中的含量在GB/T26572-2011规定的限量要求以下； 3. X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T26572-2011规定的限量要求； 4.