User Manual
8
INSTALLATION
Door opening
Your refrigerator should be positioned
to allow easy access to a counter when
removing food. For best use of the
refrigerator drawers and freezer baskets, the
refrigerator should be in a position where
both can be fully opened.
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
four sides and that cabinet is stable.
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning of the refrigerator:
• All four corners of the cabinet must rest
firmly on the floor.
• The front should be slightly elevated
to ensure that doors close and seal
properly.
• Doors should align with each other and
be level.
Most of these conditions can be met by raising or
lowering the adjustable anti-tip legs.
To level the cabinet using the anti-tip legs:
1. Slightly open the freezer drawer
to reveal anti-tip legs at bottom of
cabinet.
2. Lower anti-tip legs until they are both
touching the floor. Use a pair of pliers
to adjust.
To raise unit: turn leg clockwise if
looking from the top.
To lower unit: turn leg counterclockwise if
looking from the top.
Door
Door
To make final door height adjustments:
1. Open the freezer drawer to access
hinges for refrigerator doors.
2. Insert the 6mm Allen
TM
wrench into the
shaft of the lower hinge. (Included with
unit).
To lower door: turn adjustment screw
counter-clockwise if looking at the
door from below.
To raise door: turn adjustment screw
clockwise if looking at the door from
below.
NOTE
If your refrigerator is placed with the door
hinge side against a wall, you may have
to allow additional space so the door can
be opened wider.
NOTE
Product is shipped with doors adjusted to
the lowest position on the hinges.