User Manual

12
DOOR REMOVAL
7. Remove hex screws from top hinge
plate, then remove the top hinge.
8. Lift doors off bottom hinges and set
aside.
9. Unscrew the three bottom hinge screws
and remove the bottom hinges.
Lower Hinge Removal
Pin
Mechanism
Bottom
Hinge
Opening
To reinstall the refrigerator doors:
1. Replace three bottom hinge screws
and hinges on both sides of the
cabinet. Ensure screws are tightly snug
to hinges on both sides of the cabinet
before re-installing doors
2. Holding the door at a 90 degree
angle, drop the pin down into the
bottom hinge opening. Rotate it slightly
in either direction until the door falls
onto the hinge and is fully seated.

NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure you do not kink the tube. The
water line may also be difficult to pass
back through the conduit inside the
cabinet