Fridge--Freezer / Réfrigérateur--Congélateur / Kühl--Gefrierkombination / Frigorifero--Congelatore / Koel--Vriescombinatie / Køle--Fryseskab / Frigorifico--Congélador INSTRUCTION BOOK GEBRAUCHSANWEISUNG ISTRUZIONI D’USO NOTICE D’UTILISATION GEBRUIKSAANWIJZING BRUGSANVISNING INSTRUÇÕNES DE USO GB FR DE IT NL ER8197B, ER8492B, ER8497BX, ER8997B, ER9009B DK DK PO 818 16 24--01/9
Safety instructions GB Your new fridge/freezer may have other functions compared to your previous one. Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance.
Description of the Appliance Model ER8197B 4 1 2 6 5 6 1. Glass shelf 2. Bottle shelf 3. Vegetable drawer 4. Butter compartement 5. Door shelf 6. Egg holder 7. Bottle shelf 8. Freezing tray + accumulator 9. Freezer basket 10. Ventilation grille 11. Freezer calender 1 1 5 1 3 7 3 8 GB 11 9 9 9 9 10 Model 8497BX, ER8492B 4 1 6 2 5 1. Glass shelf 2. Bottle shelf 3. Vegetable drawer 4. Butter compartment 5. Door shelf 6. Egg holder 7. Bottle shelf 8. Freezing tray + accumulator 9.
1 1 13 5 6 1. 2. 3. 4. 5. 6. 7. 8. 6 1 5 2 3 7 3 8 9 12 Model ER8997B 4 11 9. 10. 11. 12. 13. 9 9 9 10 1 1 2 4 Model ER9009B 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Control Panel 5 A B C DE * -- 18 ACTION COOL F G ACTION FREEZE H I J K L A. Refrigerator power switch Switches the refrigerator on and off. G. Temperature display Shows the highest temperature inside the freezer. B. Temperature display Shows the average temperature inside the refrigerator. H. Temperature adjustment buttons/thermostat Used to set the temperature in the freezer. I. FAST FREEZE button Used to switch the fast Freeze feature on and off. C.
Setting the temperature Press the buttons until the desired temperature flashes in the temperature display (The temperature can be set between +1°C and +9°C.) "+" raises the temperature. "-" lowers the temperature. A setting of 5°C is usually suitable for normal operation. Once set, the temperature display shows "-" until the temperature inside the fridge reaches +9°C or below. Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed.
Switching off Switch off the cabinet by pressing the power switch. Keep the button pressed for approx. 1 second. Power to the cabinet is completely interrupted only when the power plug is disconnected or the fuse is removed. 5 - 18 5 - 18 A - 18 Alarms and other features Door open alarm If the fridgedoor remains open for more than 5 minutes, the red warning lamp starts flashing and an audible alarm sounds. To switch off the alarm: Press the "alarm shut-off button".
Using the freezer GB To start the freezer and set the correct temperature Switching on: Switch on the freezer by pressing the power switch. The alarm sounds if the temperature inside the freezer reaches room temperature. Turn off the alarm by pressing the switch-off button. Setting the temperature Press the buttons until the desired temperature blinks on the temperature display. (The temperature can be set between -15°C and -24°C.) "+" increases the temperature. "-" decreases the temperature.
Temperature alarm If the temperature rises above -12°C, the red warning lamp flashes and an audible alarm sounds. The temperature display will then start to flash. To switch off the alarm: Press the alarm shut-off button to switch off the audible alarm. The temperature display will stop flashing. The red warning lamp goes out when the temperature inside the freezer again falls below -11°C. Find out what caused the alarm. See the chapter "Something not working".
Practical advice on freezing · When freezing products, use the top shelf, and if necessary the shelf beneth that. · Place the foods directly on the freezer shelves. · Spread out the products as much as possible to allow air to circulate between them. · Do not place food products which are to be frozen directly against other frozen food. The heat from the unfrozen food may cause the frozen food to thaw on the surface. · Once frozen, re-arrange the products and put them as close as possible to each other.
Model ER8197B, ER8497BX, ER8997B Cold accumulator The cold accumulator will keep the food cold for longer after a power failure. The cold accumulator will be most effective when placed at the front of the fast-freezing tray. When freezing large amounts of food/provisions, the accumulator moves to the tray/space nearest to the lower freezing shelf. When defrosting: Place the cold accumulator on top of the frozen food to keep it cold. Ice cubes Fill the ice tray to max. 3/4 since water expands as it freezes.
· When cleaning the cabinet, use a mild Protect the environment washing-up detergent. · Follow the advice in the section "Saving energy" · The door gasket and coolant used in this · Hand over the cabinet packaging and discarded · fridges and freezers to a recycling station. Contact your local city office or your closest dealer for more information. Keep foodstuff in re-usable containers. Cut down on disposable material as much as possible. cabinet will not harm the ozone layer.
Defrosting the freezer A certain amount of frost will always form on the freezer shelves and around the top compartment. Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm. Remove the freezer drawers and place them on top of each other by turning every other drawer one half turn. Put insulating material around the drawers, e.g. blankets or newspapers. The frozen products can also be packed closely together and be kept in a cold location, e.g. in the fridge.
Something Not Working GB Before contacting your local Service Force Center check the following point: Problem " " is displayed in the temperature display. Or The yellow Action Freeze and red warning lamp both flash. Possible cause / Remedy An error has occurred in measuring the temperature. Call your service representative. (The cooling system will continue to keep food products cold, but temperature adjustment will not be possible.) Audible alarm + flashing red warning lamp.
Too much frost and ice are produced. Make sure that the door is completely closed and that the insulating strip is complete and clean. Set a higher temperature. The compressor operates continuously. Set a higher temperature. Make sure that the door is completely closed and that the insulating strip is complete and clean. The cabinet does not operate at all. Cooling or interior light does not operate. No indicator lamps light. The power plug is not properly connected. The fuse has blown.
Technical specification GB Model ER8197B ER8497BX ER8997B ER8492B ER9009B Volume fridge Volume freezer 193 l 97 l 240 l 85 l 240 l 127 l 240 l 85 l 292 l 85 l Width 595 mm 595 mm 595 mm 595 mm 595 mm Height 2000 mm 1800 mm 2000 mm 1800 mm 2000 mm Depth 600 mm 600 mm 600 mm 600 mm 600 mm Energy consumption 336 kWh/y 460 kWh/y 511 kWh/y 343 kWh/y 365 kWh/y Energy class A B B A A Rated power 160W 160W 160W 160W 160W Weight 89 kg 87 kg 94 kg 83 kg 86 kg Fr
Cleaning Wash the inside of the cabinet using lukewarm water, a mild washing-up detergent and a soft cloth. Installing the cabinet To otain the best performance from the cabinet, ensure : · the cabinet is placed in a dry, cool place and is not exposed to direct sunlight. · the cabinet is not placed close to a source of heat, e.g. a cooker or dishwasher. · the room in which the cabinet is placed has a temperature of +16C to +32C. · the cabinet is level.The cabinet should not lean against any wall.
Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter Electrical connection This appliance must be earthed. "E" or the earth symbol yellow. If the plug that is fitted to your appliance is not suitable for your socket outlett, it must be cut of and the appropriate plug fitted. Remove the fuse from the cut off plug.The cut off plug should then be disposed of to prevent the hazard of socket inanother part of your home.
6. On the doors: Change the positions of the door fittings. Put a new plug in the hole on the lower door. 6 7. Replace the upper door and secure the upper hinge pin. Replace the lower door. Change the position of the hinge pin of the lower hinge. Then secure the hinge. Remove any play in the door by adjusting the height of the lower hinge with the supplied spanner. Secure with the lock-nut. 8. Raise the cabinet and replace the ventilation grille. 7 9. Unscrew the handle.
MARIESTAD DD--AV